Transcription
ISSI Reliability Test Equipment ListThe reliability test equipment utilized throughout ISSI’s device measurementlaboratory and approved subcontractors are shown in below Table.
Table 1: ISSI Reliability Test Equipment ListCategoryVisualItemStereoMicroscopeScanning ElectronMicroscope (SEM)AcousticMicroscope (CSAM)Optical MicroscopeX-rayElectrical TestStress TestKeytek ESD &Latch-up Test systemCurve TracerParameter TesterOscilloscopeBench testers(GII, Adventest -Tester,EPRO-142,etc.)MOSAID TesterTemperature ProbeSystemHTOL OvenHAST Test SystemTemperatureCycling SystemBake OvenTemp.& Humid. StorageChamberPCT Test SystemIR-reflow chamberOther Package RelatedTestsApplicationFor visual inspection ofwafer and package partsInspect surface or cross sectionof a device at high magnificationFor visual inspection delamination inpackageFor visual inspection both wafer andpackage partsTo inspect the bonding wire ofencapsulated devicesTo test ESD and Latch-up, bothJEDEC and EIAJ modes availableTo measure parametersTo measure parametersTo test timing and functionalitiesTo test parametric and functionalcharacteristics.Application SiteIn-house labIn-house labIn-house labIn-house labIn-house labCurrently insubcontractorIn-house labIn-house labIn-house labIn-house labTo test functionalities and parametersIn-house labTo probe the device at high temperature. In-house labTo do high-temperature operating lifetestTo do highly accelerative stress testTo do temperature cycling test(-65 to 150 )To do baking and data retention test.To do high temp and humidity soak test.In-house labTo do pressure cooker test.To do preconditioning test.To quality the leads, marking, etc.In-house labIn-house labIn-house labIn-house labIn-house labIn-house labIn-house lab
Figure 1. STK Burn-in Oven, for HTOL testFigure 2. Signality Burn-in Oven, for HTOL test
Figure 3. HIRAYAMA Pressure Oven, for HAST testFigure 4. HITACHI Thermal Shock chamber for TCT test
Figure 5. HITACHI Cycling Oven, for TCT testFigure 6. ISUZU High Temp Oven, for HTS test
Figure 7. HITACHI Humidity Oven, for THS testFigure 8. KSON Temperature cycle chamber and Keithley system switch/mutimeter, for solder jointlife test
To do temperature cycling test ( - 65 W to 150 W ) In- house lab Bake Oven To do baking and data retention test. In- house lab Temp.& Humid. Storage Chamber To do high temp and humidity soak test. In- house lab PCT Test System To do pressure cooker test. In- house lab IR- reflow chamb er T
