Transcription
service@spaenaur.comSpaenaur HomeFull Spaenaur CatalogContact UsFrançaisInchHex Nuts / Square NutsÉcrous hexagonaux / Écrous carrésTHREADCCASME AINLESSBRASSSTEELALUMINUMPlain18-8 Plain(Alloy 6061-T6)ORDER BY SPAENAUR NUMBERS LISTED BELOWSTEELZinc 3/8"7/16"7/16"7/16"7/16"9/16"9/16"5/8" 2"5/32"3/16"3/16"7/32"7/32"1/4" HN-554 HN-165B 22-1T155-P06-1C734735736Note:All sizes 0-80 to5/16" are doublechamfer and double ctsk.See page C8 for completelisting of Nylon Hex Nuts.NOT PLATEDSQUARE NUTSCLASS 2B THREAD*205-002 Zinc 05-2KHN-3004159-027161-A01-1CHN-3001HN-3019 159-022 316 S.S. ASTM B16-58(Brass Specs.)Note:Mini Sizes 0-80 to1-72 are not chamfered, not ctsk.Sizes:2-56 to 1/4"-20 aredouble chamferand double ctsk.Note:Mini Sizes 0000 to1-72 not chamfered, not ctsk.Sizes:2-56 to 1/4" aredouble chamfer,double ctsk.Thickness & WidthAcross Flats toANSI/ASME B18.2.2Note:HN-3003 singlechamfer only.HN-3019 is singlechamfer and double ctsk.Other sizes:4-40 to 5/16" aredouble chamfer,double ctsk.Thickness & WidthAcross Flats toANSI/ASME B18.2.2ASME /16"49/64"25N-1121"-81-1/2"7/8"25SQUAREP: 1-800-265-8772 F: 1-888-252-6380 www.ASME B18.6.3Machine Screw NutsZINC PLATEDSPAENAURNo.N-25N-26N-27N-28N-29B-1548N-183 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc.Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc.L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.17 Jan 2018159-W04-1THN-2036 159-W19-1TThickness & WidthAcross Flats toANSI/ASME B18.2.2NUTNUTSPAENAUR THREAD WIDTH THICK- PKGSIZEA.F.NESS QTY.No.N-103HN-2034HN-2028HN-2027HN-2000157-001PKG QTY. 100All Above Listed 21/4"-201/4"-28PKG QTY. "3/8"1/8"3/8"1/8"7/16"3/16"7/16"3/16"CATALOG 141-800-265-8772
1-800-265-8772service@spaenaur.comSpaenaur HomeFull Spaenaur CatalogInchTHREADS are Unified StandardClass 2B Thread FitSTEEL HEX NUTSFinished FullAvailable in Plain or Zinc Chromate PlatedASME B18.2.2SAE Grade 2INCH CAP SCREW SIZESCOARSE THREADSPAENAUR No.PlainZinc Plated ThreadFINE THREADSPAENAUR No.PlainZinc Plated 59/64"5-1/2–4-1/212STEEL HEX NUTSAvailable in Plain or Zinc Chromate PlatedASME B18.2.2SAE Grade RSE THREADSPAENAUR No.PlainZinc Plated PB-98B-99B-100155-348155-346155-356FINE THREADSPAENAUR No.PlainZinc Plated 5Heat Treated Class 2B Thread FitHIGH TENSILE HEX NUTSPlain Finish or Zinc Plated withYellow Dichromate DippedFinishedSAE GRADE 8ASME B18.2.2NOMINALSIZE(Inches)CATALOG 141/45/163/87/161/25/83/47/811-1/81-1/41-1/2COARSE THREADSPAENAUR No.PlainZinc Plated 11THREADS are Unified StandardClass 2B Thread FitFinished FullNOMINALSIZE(Inches)FrançaisHex NutsÉcrous hexagonauxPouceNOMINALSIZE(Inches)Contact UsSIZES 1/4" THROUGH 3/4" ARE COLD FORMED, ROCKWELL C30-32.7/8" THROUGH 1-1/2" ARE HOT FORMED, ROCKWELL C28-34.FINE THREADSPAENAUR No.PlainZinc Plated 1/32"1-1/16"1-9/32"1005050252525201510555 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc.Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc.L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.P: 1-800-265-8772 F: 1-888-252-6380 www.comC317 Jan 2018CC
service@spaenaur.comSpaenaur HomeFull Spaenaur CatalogContact UsFrançaisInchHex Jam / Heavy NutsContre-écrous hexagonaux / Écrous épaisHEX JAM NUTSFinishedSteelANSI B18.2.2Class 2B Thread FitCNot Plated*Zinc 67/161/21/29/165/85/83/43/47/87/812-1/4HEAVY HEX NUTSSteelANSI B18.2.2Class 2B Thread FitNot Plated*Zinc /87/8111-1/81-1/81-1/41-1/41-3/81-1/21-3/42COARSE 89HN-42*155-P41-1AHN-245HN-167HN-246HN-247FINE 05025252511/2"9/16"9/16"11/16"11/16"3 / 4"7 / 8"7 / 8"15/16"1-1/16"1 - 1 / 1 102H KGQTY.PLAIN 01010101010101010105For use with B7 Studs & Rods2H Nuts are used for high temperature, highpressure applications such as pipelines,pressure vessels, valves and controls used inthe transmission and storage of oil, gasoline,natural gas, steam and many other chemicals.PHYSICAL PROPERTIES:Specification: ASTM A 194-2HGrade: AISI 1045 or 1050Heat Treatment: Oil Quench & TemperHardness:1-1/2 in. incl. Brinell 248 to 327, over1-1/2 in. Brinell 212 to 327.See page D3 for ASTM F436 STRUCTURAL WASHERS.See page B289 for B7 Threaded Rod.For Hexagon Nuts with LEFT HAND THREADS, see next page.For HOT GALVANIZED STEEL NUTS, see page C6.For L9 HEX NUTS and L9 FASTENING SYSTEM, see pages B147 to B150.C4 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc.Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc.L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.17 Jan 2018P: 1-800-265-8772 F: 1-888-252-6380 www.comCATALOG 141-800-265-8772
1-800-265-8772service@spaenaur.comSpaenaur HomeFull Spaenaur CatalogInchContact UsFrançaisCoupling Nuts / Hex NutsÉcrous de raccord / Écrous hexagonauxPouceCOUPLING NUTSSTEELFor joining lengths of threaded rod end-to-end.Right-hand Threads.NotPlatedASME B18.2.2DOUBLE THICKNESSNUTS (U.N.F.) FINE THREADTo be used with THREADED RODS- see pages B286-B290C(FINISHED HIGH HEXAGON NUTS)ZINC PLATED STEELSPAENAURNo.Size &ThreadsPer 10-24 UNC10-32 UNF1/4"-20 UNC1/4"-28 UNF5/16"-18 UNC5/16"-18 UNC5/16"-24 UNF3/8"-16 UNC3/8"-24 UNF3/8"-24 UNF7/16"-14 UNC7/16"-20 UNF1/2"-13 UNC1/2"-13 UNC1/2"-20 UNF1/2"-20 UNF5/8"-11 UNC5/8"-11 UNC5/8"-18 UNF3/4"-10 UNC3/4"-10 UNC3/4"-16 UNF7/8"-9 UNC7/8"-14 UNF1"-8 UNC1"-14 UNF1-1/8"-7 UNC1-1/4"-7 UNC1-1/4"-12 UNF1-1/2"-6 UNC1-1/2"-12 1515101010551111Zinc Plated Steel - LEFT-HAND ThreadsCATALOG 14155-351155-352155-353155-3543/8"-16 UNC1/2"-13 UNC5/8"-11 UNC3/4"-10 51518-8 Stainless Steel - RIGHT-HAND 4155-8051/4"-20 UNC5/16"-18 UNC3/8"-16 UNC1/2"-13 UNC5/8"-11 UNC3/4"-10 2-1/4"502525251010THREADS are Unified Standard, Class 2B FitSPAENAURNo.WidthNominalAcrossSizeThread FlatsThicknessPKGGrade E 2 STEEL - Not platedLEFT-HAND THREADASME B18.2.2SPAENAUR No.ThreadWidth "************Grade 5Hex Jam NutThickness PKG 55Heavy Hex NutFor Metric Coupling Nuts See page B293. 2018 Spaenaur Inc. All rights reserved. Catalog may not be reproduced, in whole or in part, without the written permission of Spaenaur Inc.Subject to Catalog Terms and Conditions of Use available at Spaenaur.com and on page TC2 and TC3 at the back of this catalog. 2018 Spaenaur Inc. Tous droits réservés. Le catalogue ne peut être reproduit, en tout ou en partie, sans l’autorisation écrite de Spaenaur Inc.L’utilisation est soumise aux Conditions d’utilisation du Catalogue disponibles sur Spaenaur.com et à la page TC4 et TC5 à la in de ce catalogue.P: 1-800-265-8772 F: 1-888-252-6380 www.comC518 JAN 2018C
service@spaenaur.comSpaenaur HomeFull Spaenaur CatalogContact UsFrançaisInchHex Full / Jam NutsÉcrous hexagonaux complets / Contre-écrousHEX NUTS1/4C5/163/87/161/21/25/8FullHEXAGONNUTS3/47/81 5/163/87/161/2FinishedJamHEXAGONNUTSSpecial JamTHREAD20 UNC28 UNF18 UNC24 UNF16 UNC24 UNF14 UNC20 UNF13 UNC20 UNF13 UNC11 UNC18 UNF10 UNC16 UNF9 UNC14 UNF8 UNC14 4"1-1/8"41/64"1-5/16"3/4"1-1/2"55/64"157-009 (1-1/16" Across Flats, 39/64" thick.)1/4Brass5/83/47/8120 UNC
ASME B18.2.2 ASME B18.2.2 STEEL HEX NUTS Finished Full SAE Grade 2 HIGH TENSILE HEX NUTS Finished SAE GRADE 8 Heat Treated Class 2B Thread Fit Plain Finish or Zinc Plated with Yellow Dichromate Dipped SIZES 1/4" THROUGH 3/4" ARE COLD FORMED, ROCKWELL C30-32. 7/8" THROUGH 1-1/2" ARE HOT FORMED, ROCKWELL C28-34. NOMINAL COARSE THREAD FINE
