Transcription
www.CompressorParts.com10349 Industrial RdHolland Ohio 435281-888-855-1123SH- 32RHB-68MATERIAL SAFETY DATA SHEETMATERIAL SAFETY DATA SHEETPrint date:31-Jul-2012Revision Numb er: 1Revision date: 31-Jul-20121. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THECOMPANY/UNDERTAKINGProduct Name:RHB-68Frick2a ReplacementArticle Code:Synonyms:Chemical characterisation:340257No information availableNo data is available on the product itself.Supplier:Summit Industrial Products9010 County Road 2120Tyler, Texas 75707Phone: (903) 534-8021Fax: (903) 581-4376Emergency telephone numberCHEMTREC: 1-800-424-9300, International: (703) 527-38872. COMPOSITION/INFORMATION ON INGREDIENTSNote for Non-Hazardous Components This material has no known hazards under applicable laws.3. HAZARDS IDENTIFICATIONProperties affecting health:None.Principle routes of exposure:Skin.Skin contact:May cause sensitization by skin contact. Contact causes skin irritation.Eye contact:Mild eye irritation. Avoid contact with eyes.Inhalation:Avoid breathing vapors or mists. Vapors and/or aerosols which may be formed atelevated temperatures may be irritating to eyes and respiratory tract.Ingestion:Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhoea4. FIRST AID MEASURESGeneral advice:In case of feeling unwell:. Consult a physician.Skin contact:Wash off immediately with soap and plenty of water. Remove and wash contaminatedclothing before re-use. If symptoms persist, call a physician.Eye contact:Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.If eye irritation persists, consult a specialist.Product nam e: RHB-681 of 5
Inhalation:In the case of inhalation of aerosol/mist consult a physician if necessary. Move to freshair. If not breathing, give artificial respiration.Ingestion:If swallowed, seek medical advice immediately and show this container or label. Do notinduce vomiting without medical advice. Never give anything by mouth to anunconscious person.5. FIRE-FIGHTING MEASURESSuitable extinguishing media:Carbon dioxide (CO2), Dry chemical, Water spray mist or foamExtinguishing media which must not be used for safety reasons:No information available.Special protective equipment for firefighters:In the event of fire, wear self-contained breathing apparatus. Standard procedure for chemical fires.Specific hazards:Unusual hazards:Specific methods:Keep product and empty container away from heat and sources of ignitionNo hazards resulting from the material as suppliedWater mist may be used to cool closed containers.Flash point:Autoignition temperature: 347 ( F)No information availableFlammability Limits in Air:LowerUpperNo information availableNo information available6. ACCIDENTAL RELEASE MEASURESPersonal precautions:Ensure adequate ventilation. Remove all sources of ignition. Use personal protectiveequipment. Avoid contact with skin, eyes and clothing. Contaminated surfaces will beextremely slippery.Environmental precautions:Prevent further leakage or spillage if safe to do so. Prevent product from entering drains.Do not flush into surface water or sanitary sewer system.Methods for cleaning up:Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical wastecontainer.7. HANDLING AND STORAGEHandlingTechnical measures/precautions:Safe handling advice:StorageTechnical measures/storage conditions:Incompatible products:Use only in area provided with appropriate exhaust ventilationSpilling onto the container s outside will make containerslippery. Avoid contact with skin and eyes. Always replacecap after use.Keep containers dry and tightly closed to avoid moistureabsorption and contamination. Store in cool place.No special restrictions on storage with other products.8. EXPOSURE CONTROLS / PERSONAL PROTECTIONEngineering measures to reduce exposure:Ensure adequate ventilation, especially in confined areas.Personal Protective Equipment2 of 5
Respiratory protection:Hand protection:Skin and body protection:Eye protection:Hygiene measures:In case of mist, spray or aerosol exposure wear suitable personal respiratory protectionand protective suit.Nitrile rubber.Usual safety precautions while handling the product will provide adequate protectionagainst this potential effect.Safety glassesAvoid contact with skin, eyes and clothing.9. PHYSICAL AND CHEMICAL PROPERTIESPhysical State:Color:Specific gravity:Evaporation rate:Vapor pressure:LiquidClear 1.0Not determinedNot determinedAppearance:Odor:Boiling point/rangeVapor density:Solubility:LiquidMild Hydrocarbon-like 600 ( F)Not determinedInsoluble.10. STABILITY AND REACTIVITYStability:Polymerization:Hazardous decomposition products:Materials to avoid:Conditions to avoid:Stable under recommended storage conditions.None under normal processing.Thermal decomposition can lead to release of irritating gasesand vapours., Incomplete combustion may produce smallamounts of Carbon Dioxide, Carbon Monoxide, Water VaporOxidising agents (strong).Stable at normal conditions.11. TOXICOLOGICAL INFORMATIONAcute toxicity:No data available12. ECOLOGICAL INFORMATIONMobility:No information available.Bioaccumulative potential:Not determined.Ecotoxicity effects:No data available.Aquatic toxicity:No information available13. DISPOSAL CONSIDERATIONSWaste from residues / unusedproducts:In accordance with local and national regulations.Contaminated packaging:Empty containers should be taken for local recycling, recovery or waste disposal14. TRANSPORT INFORMATIONDOTProper shipping name:Not ApplicableTDG (Canada)3 of 5
14. TRANSPORT INFORMATIONProper shipping name:Not ApplicableIMO / IMDGProper shipping name:Not ApplicableICAOProper shipping name:Not ApplicableProper shipping name:Not ApplicableIATA15. REGULATORY INFORMATIONInternational InventoriesPICCS: This product does not comply w ith phil:TSCA: Listed in TSCADSL: All of the components in this product are listed in DSLENCS: This product does not comply w ith JPENCSCHINA: This product does not comply w ith china:AICS: All the constituents of this material are listed on the Australian Inventory of Chemical Substances (AICS).KECL: This product does not comply w ith korea:EINECS/ELINCS This product complies w ith EINECS/ELINCSU.S. Regulations:Sara (311, 312) hazard class:CanadaWHMIS hazard class:Non-controlled16. OTHER INFORMATIONNFPAHealth:1Flammability: 1Instability:0HMIGHealth:1Flammability: 1Reactivity:0NFPA symbol:Reason for revision:Prepared by:Not applicableHealth & Safety4 of 5
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the dateof its publication. The information given is designed only as a guidance for safe handling, use, processing, storage,transportation, disposal and release and is not to be considered a warranty or quality specification. The information relatesonly to the specific material designated and may not be valid for such material used in combination with any other materialsor in any process, unless specified in the text.5 of 5
www.CompressorSH P-arts.com32 10349 Industrial Rd Holland Ohio 43528 1-888-855-1123 Frick 2a Replacement. Inhalation: In the case of inhalation of aerosol/mist consult a physician if necessary. Move to fresh air. If not breathing, give artificial respiration. Ingestion: If swallowed, seek medical advice immediately and show this container or label. Do not induce vomiting without medical advice .
