Galvanized Rigid Conduit (GRC) Couplings & Elbows

Transcription

Galvanized Rigid Conduit (GRC) Couplings & ElbowsGalvanized Rigid Conduit (GRC) CouplingsECN Elbows, Couplings & NipplesListed to Underwriters Laboratories Safety Standard UL 6Manufactured in accordance with ANSI C80.1TradeSizeMetricDesignator 23 411 1 41 1 222 1 233 1 24561621273541536378911031291551Nominal O.D. (A)2ThreadsPerInch1Length 3123.8152.4182.91 5 81 41 641 31 322 1 322 1 162 1 83 3 163 5 163 13 323 33 643 61 644 1 0141411 1 211 1 211 1 211 1 2888888Approximate WeightPer 100 PackageB1005030252520111111AORIGINALTHIS SHEET CONTAINSCONFIDENTIAL, PROPRIETARY DRAWN:INFORMATION OF COPE AND ITS XXXXAFFILIATES. ANY PERSONDATE:ACCEPTING THIS SHEETAND/OR INFORMATION AGREES XXXXTO MAKE NO DISCLOSURE, USE APPROVED:XXXXOR DUPLICATION THEREOFEXCEPT AS AUTHORIZED BYDATE:COPE AND TO RETURN THISXXXXSHEET ON REQUEST.TOLERANCE UNLESSOTHERWISE NOTED:2 PLACE 0.XX 0.0153 PLACE 0.XXX 0.005DEG X 2FRACTIONAL X/X 1/32MATERIAL:XXXXXXMinimum requirement as per UL Standard1FINISH:XXXXXXSuper Kwik-Coupling COPYRIGHT 2015 UNISTRUT.ALL RIGHTS RESERVED.UNLESS OTHERWISENOTED: DIMENSIONSARE IN INCHES [ MM]DIMENSIONS INPARENTHESES ( ) AREREFERENCE ONLYMANUFACTURINDESCRIPTION:XXXXXXSIZE:PART NUMBA XXXSCALE:1:2WListed to Underwriters Laboratories Safety Standard UL 514BManufactured in accordance with ANSI C22.2 No. 18.3-12TradeSizeMetricDesignator2 1 233 1 24637891103Nominal O.D. (A)ThreadsPerInch1Length 3.193.314.15481.084.1105.4101.6Minimum requirement as per UL Standard8888Approximate WeightPer 100 Package21111SUPER KWIK-COUPLE ELBOWS AVAILABLETrade Size 2 1 2 to 4 by special order Single & Double SidedAllied Tube & Conduit CatalogGalvanized Rigid Conduit (GRC) 90º ElbowsListed to Underwriters Laboratories Safety Standard UL 6Manufactured in accordance with ANSI C80.1TradeSizeMetricDesignator 23 411 1 41 1 222 1 233 1 24561621273541536378911031291551Radius (A)1Offset (B)22Approximate WeightPer 100 Piecesin.mm.in.mm.in.mm.lb.kg.44 1 25 3 47 1 48 1 49 1 210 1 213151624301021141461842102412673303814066107625 7 878 3 410 3 412 1 414 1 21719 5 822 3 423 7 834 7 845 1 214917822227331136843249857860688611561 1 21 1 21 7 822233 1 83 1 43 3 83 5 83 3 27.61297.31596.23148.95425.1Minimum requirement as per UL StandardFor information only, not a requirement as per UL StandardSizes 2 1 2 (63) and larger shipped in palletized cartons or bulk.Also available in the following Degrees (60 , 45 , 30 , 22 1 2 , 15 & 11 1 4 )1Straight RANCE UNLESSOTHERWISE NOTED:2 PLACE 0.XX 0.0153 PLACE 0.XXX 0.005DEG X 2FRACTIONAL X/X 1/32C MATERIAL:XXXXXXTOLERANCE UNLESSOTHERWISE NOTED:2 PLACE 0.XX 0.0153 PLACE 0.XXX 0.005DEG X 2FRACTIONAL X/X 1/32MATERIAL:XXXXXXFINISH:XXXXXXORIGINALTHIS SHEET CONTAINSCONFIDENTIAL, PROPRIETARY DRAWN:INFORMATION OF COPE AND ITS XXXXAFFILIATES. ANY PERSONDATE:ACCEPTING THIS SHEETAND/OR INFORMATION AGREES XXXXTO MAKE NO DISCLOSURE, USE APPROVED:XXXXOR DUPLICATION THEREOFEXCEPT AS AUTHORIZED BYDATE:COPE AND TO RETURN THISXXXXSHEET ON REQUEST.MANUFACTURING AND QUALITDESCRIPTION:XXXXXXSIZE:PART NUMBER:UNLESS OTHERWISEFINISH:NOTED: DIMENSIONSARE IN INCHES [ MM]XXXXXXCOPYRIGHT 2015 UNISTRUT.DIMENSIONS INPARENTHESES ( ) ARE SCALE:ORIGINALALLRIGHTS RESERVED.WEIGHT: XX lbsTHIS SHEET CONTAINS1:4REFERENCE ONLYCONFIDENTIAL, PROPRIETARY DRAWN:INFORMATION OF COPE AND ITS XXXXAFFILIATES. ANY PERSONDATE:MANUFACTURING AND QUALITY CONTROL DRAWINGACCEPTING THIS SHEETXXXXAND/OR INFORMATION AGREESDESCRIPTION:TO MAKE NO DISCLOSURE, USE APPROVED:XXXXOR DUPLICATION THEREOFEXCEPT AS AUTHORIZED BYDATE:COPE AND TO RETURN THISXXXXSHEET ON REQUEST.SIZE:PART NUMBER:REVA XXXXXXXXXXXCOPYRIGHT 2015 UNISTRUT.ALL RIGHTS RESERVED.UNLESS OTHERWISENOTED: DIMENSIONSARE IN INCHES [ MM]DIMENSIONS INPARENTHESES ( ) AREREFERENCE ONLYA XXXXXSCALE:1:4WEIGHT:XX lbsNOTE: Special orders are non-cancelable, non-returnable and non-refundable.18alliedeg.comSHEET1AOF1

Galvanized Rigid Conduit (GRC) Couplings & ElbowsGalvanized Rigid Conduit (GRC) 90ºSuper Kwik-Couple ElbowTradeMetricSize Designator2 1 233 1 24637891103Radius (A)1Offset (B)2Straight (D)2Straight (E)2Approximate WeightPer 100 Piecesin.mm.in.mm.in.mm.in.mm.lb.kg.10 1 21315162673303814061719 5 822 3 423 7 843249857860633 1 83 1 43 3 8767983864 1 24 3 45 3 85 3 81141211371376951015140917501111Minimum requirement as per UL Standard2For information only, not a requirement as per UL StandardSizes 2 1 2 (63) and larger shipped in palletized cartons or bulk.Also available in the following Degrees (60 , 45 , 30 , 22 1 2 , 15 & 11 1 4 )StandardPackage2111DABEB1SUPER KWIK-COUPLE ELBOWS AVAILABLETrade Size 2 1 2 to 4 by special order Single & Double SidedTOLERANCE UNLESSOTHERWISE NOTED:2 PLACE 0.XX 0.0153 PLACE 0.XXX 0.005DEG X 2FRACTIONAL X/X 1/32MATERIAL:XXXXXXFINISH:XXXXXXORIGINALTHIS SHEET CONTAINSCONFIDENTIAL, PROPRIETARY DRAWN:INFORMATION OF COPE AND ITS XXXXAFFILIATES. ANY PERSONDATE:ACCEPTING THIS SHEETAND/OR INFORMATION AGREES XXXXTO MAKE NO DISCLOSURE, USE APPROVED:XXXXOR DUPLICATION THEREOFEXCEPT AS AUTHORIZED BYDATE:COPE AND TO RETURN THISXXXXSHEET ON REQUEST.COPYRIGHT 2015 UNISTRUT.ALL RIGHTS RESERVED.UNLESS OTHERWISENOTED: DIMENSIONSARE IN INCHES [ MM]DIMENSIONS INPARENTHESES ( ) AREREFERENCE ONLYECN Elbows, Couplings & NipplesListed to Underwriters Laboratories Safety Standard UL 514BManufactured in accordance with ANSI C22.2 No. 18.3-12MANUFACTURING AND QUALITY CONTDESCRIPTION:XXXXXXSIZE:PART NUMBER:A XXXXXSCALE:1:4WEIGHT:XX lbsGalvanized Rigid Conduit (GRC) 45º ElbowsListed to Underwriters Laboratories Safety Standard UL 6Manufactured in accordance with ANSI C80.1TradeSizeMetricDesignator 23 411 1 41 1 222 1 233 1 24561621273541536378911031291551Radius (A)1Offset (B)2Offset (C)2Straight (D)1Approximate WeightPer 100 Piecesin.mm.in.mm.in.mm.in.mm.lb.kg.44 1 25 3 47 1 48 1 49 1 210 1 2131516243010211414618421024126733038140661076277 7 89 5 811 1 813 1 815 3 417 1 221 7 826 1 826 1 435 7 843 3 817820024428333340044555666466791111022 7 83 1 444 5 85 3 86 1 27 1 4910 7 810 7 814 7 81873831021171371651842292762763784571 1 21 1 21 7 822233 1 83 1 43 3 83 5 83 3 2997.91168.02169.63442.8Minimum requirement as per UL StandardFor information only, not a requirement as per UL StandardSizes 2 1 2 (63) and larger shipped in palletized cartons or bulk.Also available in the following Degrees (90 , 60 , 30 , 22 1 2 , 15 & 11 1 4 )StandardPackage505025201510111111DABDC12TOLERANCE UNLESSOTHERWISE NOTED:2 PLACE 0.XX 0.0153 PLACE 0.XXX 0.005DEG X 2FRACTIONAL X/X 1/32MATERIAL:XXXXXXCOPYRIGHT 2015 UNISTRUT.ALL RIGHTS RESERVED.MANUFACTURDESCRIPTION:XXXXXXAllied Tube & Conduit CatalogFINISH:XXXXXXORIGINALTHIS SHEET CONTAINSCONFIDENTIAL, PROPRIETARY DRAWN:INFORMATION OF COPE AND ITS XXXXAFFILIATES. ANY PERSONDATE:ACCEPTING THIS SHEETAND/OR INFORMATION AGREES XXXXTO MAKE NO DISCLOSURE, USE APPROVED:XXXXOR DUPLICATION THEREOFEXCEPT AS AUTHORIZED BYDATE:COPE AND TO RETURN THISXXXXSHEET ON REQUEST.UNLESS OTHERWISENOTED: DIMENSIONSARE IN INCHES [ MM]DIMENSIONS INPARENTHESES ( ) AREREFERENCE ONLYSIZE:PART NUMA XXXSCALE:NOTE: Special orders are non-cancelable, non-returnable and non-refundable.800.882.5543191:4

Galvanized Rigid Conduit (GRC) Couplings & ElbowsGalvanized Rigid Conduit (GRC) Large Radius 90º ElbowsAllied Tube & Conduit CatalogECN Elbows, Couplings & NipplesListed to Underwriters Laboratories Safety Standard UL 6Manufactured in accordance with ANSI C80.1TradeSizeMetricDesignator111111 1 41 1 41 1 41 1 41 1 41 1 21 1 21 1 21 1 21 1 2222222 1 22 1 22 1 22 1 22 1 23333333 1 23 1 23 1 23 1 63636378787878787891919191103103103103103Radius (A)1Offset (B)2Straight (D)1Approximate WeightPer 100 141219152461076291412196107629141219152427 7 834 5 84146 3 461 1 427 7 834 5 84146 3 461 1 427 7 834 5 84146 3 461 1 427 7 830 3 84146 3 461 1 424 3 831 1 837 1 244 3 461 1 424 3 833 1 838 5 846 7 860 1 475 7 835 1 838 1 24760 1 435 1 839 3 84760 1 475 7 191153019278929781194153089210001194153019279 7 810 5 81110 3 413 1 49 7 810 5 81110 3 413 1 49 7 810 5 81110 3 413 1 49 7 86 3 81110 3 413 1 46 3 87 1 87 1 28 3 413 1 46 3 89 1 88 5 810 7 812 1 415 7 811 1 88 1 21112 1 411 1 89 3 81112 1 415 7 For information only, not a requirement as per UL StandardShipped in palletized cartons or bulk.Also available in the following Degrees (60 , 30 , 22 1 2 , 15 & 11 1 4 )DDABDACBDTOLERANCE UNLESSOTHERWISE NOTED:2 PLACE 0.XX 0.0153 PLACE 0.XXX 0.005DEG X 2FRACTIONAL X/X 1/32CMATERIAL:XXXXXXTOLERANCE UNLESSOTHERWISE NOTED:2 PLACE 0.XX 0.0153 PLACE 0.XXX 0.005DEG X 2FRACTIONAL X/X 1/32MATERIAL:XXXXXXFINISH:XXXXXXORIGINALTHIS SHEET CONTAINSCONFIDENTIAL, PROPRIETARY DRAWN:INFORMATION OF COPE AND ITS XXXXAFFILIATES. ANY PERSONDATE:ACCEPTING THIS SHEETAND/OR INFORMATION AGREES XXXXTO MAKE NO DISCLOSURE, USE APPROVED:XXXXOR DUPLICATION THEREOFEXCEPT AS AUTHORIZED BYDATE:COPE AND TO RETURN THISXXXXSHEET ON REQUEST.MANUFACTURING AND QUALITY CONTROL DRADESCRIPTION:XXXXXXSIZE:PART NUMBER:UNLESS OTHERWISEFINISH:NOTED: DIMENSIONSARE IN INCHES [ MM]XXXXXXCOPYRIGHT 2015 UNISTRUT.DIMENSIONS INPARENTHESES ( ) ARE SCALE:ORIGINALALLRIGHTS RESERVED.THIS SHEET CONTAINSWEIGHT: XX lbs1:4REFERENCE ONLYCONFIDENTIAL, PROPRIETARY DRAWN:INFORMATION OF COPE AND ITS XXXXAFFILIATES. ANY PERSONDATE:MANUFACTURING AND QUALITY CONTROL DRAWINGACCEPTING THIS SHEETAND/OR INFORMATION AGREES XXXXDESCRIPTION:TO MAKE NO DISCLOSURE, USE APPROVED:XXXXOR DUPLICATION THEREOFEXCEPT AS AUTHORIZED BYDATE:COPE AND TO RETURN THISXXXXSHEET ON REQUEST.SIZE:PART NUMBER:REVA XXXXXXXXXXXCOPYRIGHT 2015 UNISTRUT.ALL RIGHTS RESERVED.UNLESS OTHERWISENOTED: DIMENSIONSARE IN INCHES [ MM]DIMENSIONS INPARENTHESES ( ) AREREFERENCE ONLYA XXXXXSCALE:1:4WEIGHT:XX lbsSHEET2Chart continued on next pageNOTE: Special orders are non-cancelable, non-returnable and non-refundable.20alliedeg.com1AOF1SHEET

Galvanized Rigid Conduit (GRC) Couplings & ElbowsGalvanized Rigid Conduit (GRC) Large Radius 90º ElbowsListed to Underwriters Laboratories Safety Standard UL 6Manufactured in accordance with ANSI s (A)1Offset (B)2Approximate WeightPer 100 PiecesStraight 49141219152450 3 465 1 475 7 850 3 465 1 475 7 812891657192712891657192714 3 417 1 415 7 814 3 417 1 415 7 551.05821.06667.95981.67650.98763.6For information only, not a requirement as per UL StandardShipped in palletized cartons or bulk.Also available in the following Degrees (60 , 45 , 30 , 22 1 2 , 15 & 11 1 4 )ECN Elbows, Couplings & NipplesTradeSizeDDABDACBD2TOLERANCE UNLESSOTHERWISE NOTED:2 PLACE 0.XX 0.0153 PLACE 0.XXX 0.005DEG X 2FRACTIONAL X/X 1/32CMATERIAL:XXXXXXGalvanized Rigid Conduit (GRC) Large Radius 45º ElbowsTOLERANCE UNLESSOTHERWISE NOTED:2 PLACE 0.XX 0.0153 PLACE 0.XXX 0.005DEG X 2FRACTIONAL X/X 1/32MATERIAL:XXXXXXListed to Underwriters Laboratories Safety Standard UL 6Manufactured in accordance with ANSI C80.1MetricDesignator111111 1 41 1 41 1 41 1 41 1 41 1 21 1 21 1 21 1 21 1 2222222 1 22 1 22 1 22 1 22 1 3Radius (A)1Offset (B)2Offset (C)2Straight 761076291412193036404454 1 23036404454 1 23036404454 1 23036404454 1 23036404454 1 8138476291410161118138476291410161118138412 1 2151718 1 222 1 212 1 2151718 1 222 1 212 1 2151718 1 222 1 212 1 2151718 1 222 1 212 1 2151718 1 222 1 756759909901301Minimum requirement as per UL StandardFor information only, not a requirement as per UL StandardSizes 2 1 2 (63) and larger shipped in palletized cartons or bulk.Also available in the following Degrees (90 , 60 , 30 , 22 1 2 , 15 & 11 1 4 )XXXXXXSIZE:PART NUMBER:UNLESS OTHERWISEFINISH:NOTED: DIMENSIONSARE IN INCHES [ MM]XXXXXXCOPYRIGHT 2015 UNISTRUT.DIMENSIONS INPARENTHESES ( ) ARE SCALE:ORIGINALALLRIGHTS RESERVED.THIS SHEET CONTAINSWEIGHT: XX lbs1:4REFERENCE ONLYCONFIDENTIAL, PROPRIETARY DRAWN:INFORMATION OF COPE AND ITS XXXXAFF

Manufactured in accordance with ANSI C80.1 Trade Size Metric Designator Nominal O.D. (A)2 Length (B)1 Threads Per Inch1 Approximate Weight Per 100 Pieces Standard Package in. mm. in. mm. lb. kg. 1 2 16 1.01 25.7 1 5 8 41.3 14 12 5.4 100 3 4 21 1.25 31.8 1 41 64 41.7 14 18 8.2 50 1 27 1.53 38.7 1 31 32 50.0 11 1 2 30 13.6 30 1 1 4 35 1.87 47.5 2 1