Transcription
TOLCO Fire Protection Support SystemsPipe HangersSupportsSeismic BracingUL ListedFM Approvedfor Fire SprinklerInstallations
www.tolco.comRevision 12/06/2007Catalog ForwardWarningThis catalog has been created with an acute awareness of the field problems of the piping contractor.We have sought and received input from engineers,installers, field inspectors and others closely involvedwith the installation of piping systems. This is whereneeds are discovered, and where products and services are genuinely tested.Pipe hanger products included in this catalog areintended for installation and service only as describedherein.TOLCO is proud to present a complete and versatile line of pipe hangers and related products. TheTOLCO line has been methodically developed toeffectively address support problems in the commercial and industrial piping fields.A thorough knowledge of our customers’ needs andproblems was no less important than the development of our manufacturing skills in the emergency ofTOLCO as a leader in the pipe hanger industry. Ourpeople are equipped to respond quickly to your product and service needs on both standard items andspecialized metal fabrication.We are aware that these products have been used(often without incident) for purposes and in ways otherthan those for which they were designed and manufactured. Examples of which are: use of productsas erection tools; use of beam clamps on a beamnot specified for them; use of concrete inserts as ananchor for pulling pipe to proper elevation; suspensionof one clevis hanger under another resulting in cumulative load greater than specified capability. In suchcases of misapplication or improper use, we cannotbe held responsible for injuries or property damage.TOLCO pipe hanger products are carefully designedand manufactured to industry standards. Care shouldbe exercised by installers and end users to install, useand maintain these products properly to avoid anypossible on-the-job accidents.Custom FabricationDesignsWe have expanded our manufacturing capacity inresponse to the growing demand for customizedmetal fabrication and special hangers. When somedetail of construction or piping arrangement makes itnecessary to deviate from standard types of hangers,TOLCO is equipped to furnish hangers and supportsof any required type. These products combine provendesigns and standards with new innovations thatenhance their utility.Product design and specifications are subject tochange without notice.Approvals and SpecificationsTOLCO, as a member of the American Pipe FittingsAssociation, is cooperating with engineers and architects in the preparation of specifications coveringhanger requirements and the interpretation of applicable piping safety codes.All TOLCO products are carefully manufacturedto meed the highest standards in the industry. Allproducts, as a minimum conform to ManufacturersStandardization Society MSS-SP-58, and to the allowable stresses specified in the ANSI B31.1 code forpressure piping.FinishesMost hangers are available in: stainless steel, electro-galvanized or hot-dipped galvanized. Otherspecial finishes are available upon request. Itemsordered hot-dip galvanized may be supplied with electro-galvanized threaded components unless otherwisespecified. If you require a finish not listed in theproduct data of a specific hanger, please consultour factory.IndexFigure numbers in this catalog are in numerical order.Terms and Conditions of SaleFor conditions and terms of sale, please consult ourcurrent price guide.Many TOLCO Products are also listed, approved orconform to:Underwriter’s Laboratories UL-203Factory Mutual EngineeringNational Fire Protection Association NFPA-13,NFPA-13R, NFPA-13D and NFPA-24Federal Specification WW-H-171EEMain Office/Manufacturing Facility 1375 Sampson Ave. Corona, CA 92870 Ph: 951.737.5599 Fax: 951.737.0330Customer Service 800.786.5266www.tolco.com
www.tolco.comRevision 6/9/2008Index —Pipe Hangers and StrapsFig. 1Fig. 1FStandard Clevis Hanger Standard Clevis HangerMSS-SP-69, Type 1with Felt LiningWW-H-171E, Type 1Page 7Page 5Fig. 1CBSCross Bolt SpacerPage 6Fig. 2Adjustable Band HangerMSS-SP-69, Type 10WW-H-171E, Type 10Page 8Fig. 2NFPATrimline Band Hangerwith Reducer Rod SizeMSS-SP-69, Type 10WW-H-171E, Type 10Page 8Fig. 24Hanger forCPVC Plastic Pipe,Double Fastener StrapType Side MountPage 19Fig. 200Trimline Band HangerMSS-SP-69, Type 10WW-H-171E, Type 10Page 40Fig. 1PVCPVC CoatedClevis HangerMSS-SP-69, Type 1WW-H-171E, Type 1Page 7Fig. 3J-Hanger forPipe or ConduitMSS-SP-69, Type 5Page 11Fig. 22Hanger for CPVCPlastic PipeSingle Fastener TypePage 17Fig. 2FAdjustable Band Hangerwith Felt LiningMSS-SP-69, Type 10WW-H-171E, Type 10Page 9Fig. 3FJ-Hanger with Felt LiningMSS-SP-69, Type 5Page 11Fig. 23Hanger for CPVCPlastic Pipe, DoubleFastener Strap TypePage 18Fig. 2WONFig. 2FWONAdjustable Band HangerAdjustable Bandw/o Swivel NutHangerMSS-SP-69, Type 7w/o Swivel NutWW-H-171E, Type 7with Felt LiningPage 10MSS-SP-69, Type 10WW-H-171E, Type 10Fig. 200WONPage 10Trimline Band Hangerw/o Swivel NutMSS-SP-69, Type 7WW-H-171E, Type 7Page 43Fig. 3PVCJ-Hangerwith PVC CoatingMSS-SP-69, Type 5Page 11Fig. 120U-HangerPage 37Fig. 28Standoff Hanger andRestrainer for CPVCPlastic PipePage 22Fig. 200Trimline Band HangerMSS-SP-69, Type 10WW-H-171E, Type 10Page 41Fig. 200FHeavy Duty BandHanger (for Trapeze)MSS-SP-69, Type 10WW-H-171E, Type 10Page 42Fig. 120RWA (B)Retrofit Wrap AroundU-Hanger ClampMSS-SP-69, Type 4WW-H-171E, Type 4Page 38Fig. 29CPVC Double OffsetPage 23NOTE: For more information on TOLCO products, please see TOLCO Pipe Hangers and Support Systems Catalog.2OFFICE/MANUFACTURING FACILITY 1375 SAMPSON AVE. CORONA, CA 92879 PH: 951.737.5599 FAX: 951.737.0330CUSTOMER SERVICE 800.786.5266www.tolco.com
www.tolco.comRevision 3/1/2008Index —Pipe ClampsFig. 4BSeismicPipe ClampPage 14Fig. 4Standard Pipe ClampMSS-SP-69, Type 4WW-H-171E, Type 4Page 12Fig. 4FStandard Pipe Clampwith Felt LiningMSS-SP-69, Type 4WW-H-171E, Type 4Page 12Fig. 4APipe Clamp forSway BracingPage 13Fig. 4PVCPVC CoatedPipe ClampPage 12Fig. 6Riser ClampMSS-SP-69, Type 8WW-H-171E, Type 8Page 16Fig. 6FRiser Clampwith Felt LiningMSS-SP-69, Type 8Ww-H-171E, Type 8Page 16Fig. 6PVCPVC CoatedRiser ClampMSS-SP-69, Type 8WW-H-171E, Type 8Page 16Beam Clamps and AccessoriesFig. 61TThreaded Top HookPage 27Fig. 65Steel Reversible"C" Type Beam Clampwith Lock Nut3/4" OpeningMSS-SP-69,Type 19 & 23WW-H-171E, Type 23Page 28Fig. 66Steel Reversible"C" Type Beam Clampwith Lock Nut11/4" OpeningMSS-SP-69,Type 19 & 23WW-H-171E, Type 23Page 28Fig. 69Beam ClampRetaining StrapPage 31Fig. 69RRetrofit CapableBeam ClampRetaining StrapPage 31Fig. 130Beam Clamp withBolt and NutPage 39Upper AttachmentsFig. 42Angle BracketPage 24Fig. 50Side Beam BracketPage 24Fig. 51Side Beam Bracketfor NFPA Pipe SizingPage 25Fig. 58Threaded SideBeam BracketPage 26Fig. 75SwivelPage 32Fig. 78All SteelCeiling PlatePage 33NOTE: For more information on TOLCO products, please see TOLCO Pipe Hangers and Support Systems Catalog.OFFICE/MANUFACTURING FACILITY 1375 SAMPSON AVE. CORONA, CA 92879 PH: 951.737.5599 FAX: 951.737.0330CUSTOMER SERVICE 800.786.5266www.tolco.com3
www.tolco.comRevision 6/9/2008Index —Concrete InsertsFig. 109AConcrete Deck InsertPage 35Fig. 109AFConcrete InsertPage 36Fig. 150"Wing-It" Concrete Deck InsertPage 41Threaded Products & AccessoriesFig. 98Rod StiffenerPage 34Seismic Brace AttachmentsFig. 4LLongitudinal “In-Line”Sway Brace AttachmentPage 15Fig. 9074-Way LongitudinalSway Brace AttachmentPage 48Fig. 981Retrofit Universal SwayBrace AttachmentPage 53Fig. 25Surge RestrainerPage 20Fig. 800Adjustable Sway BraceAttachment to SteelPage 44Fig. 909No-Thread SwivelSway Brace AttachmentPage 49Fig. 990Cable Sway BraceAttachmentPage 54Fig. 910SwivelSway Brace FittingPage 50Fig. 991Cable Sway BraceAttachmentPage 55Fig. 825Bar Joist SwayBrace AttachmentPage 45Fig. 825ABar Joist SwayBrace AttachmentPage 46Fig. 975StraightSway Brace FittingPage 51Fig. 906Sway BraceMulti-Fastener AdapterPage 47Fig. 980Universal SwivelSway Brace AttachmentPage 52Fig. 1000Fig. 1001"Fast Clamp"Sway Brace AttachmentSway Brace AttachmentPage 57Page 56Fig. 2002Sway Brace AttachmentPage 58NOTE: For more information on TOLCO products, please see TOLCO Pipe Hangers and Support Systems Catalog.4OFFICE/MANUFACTURING FACILITY 1375 SAMPSON AVE. CORONA, CA 92879 PH: 951.737.5599 FAX: 951.737.0330CUSTOMER SERVICE 800.786.5266www.tolco.com
www.tolco.comRevision 12/10/2007Component of State ofCalifornia OSHPD ApprovedSeismic Restraints SystemFig. 1 - Standard Clevis HangerSize Range — Size 1/2" thru 36" pipe.Material — Carbon SteelFunction — Recommended for the suspension of non-insulated pipe or insulated pipe with Fig. 220 shield.Note — When an oversized clevis is used, a pipe spacer shouldbe placed over the cross bolt to assure that the lower U-strapwill not move in on the bolt. When attaching seismic bracingto clevis hangers, a Fig. 1 CBS (cross bolt spacer) must beinstalled. See TOLCO Seismic Restraint Approval Guidelines.Approvals — Underwriters’ Laboratories Listed in the USA (UL),Canada (cUL) 3/4" thru 8". Conforms to Federal SpecificationWW-H-171E, Type 1, and Manufacturers StandardizationSociety SP-69, Type 1. Also available to accommodate rodschedule per National Fire Protection Association (NFPA)Pamphlet 13. Included in our Seismic Restraints Catalogapproved by the State of California Office of Statewide HealthPlanning and Development (OSHPD). For additonal load,spacing and placement information relating to OSHPD projects, please refer to the TOLCO Seismic Restraint SystemsGuidelines.Maximum Temperature — 650 FFinish — PlainNote — Available in Electro-Galvanized and HDG finish or Stainless Steel.Dimensions WeightsPipeSizeRod Size ASTDNFPABCDMax. Rec.Load Lbs.Approx.Wt./1001/23/413/83/83/83/83/83/821 1627 831 413 1617 821 1611161061061036384211 411 223/83/83/83/83/83/839 1637 847 1621 423 823 411161061061046495521 2331 21/21/21/23/83/83/855 16515 1667 1631 431 233 4111 411 41130113011301241401524565/85/83/43/81/21/273 8815 16913 1641 451 451 211 211 211 2143014301940190235317810123/47/87/81/25/85/8129 16161 4189 1671 895 81013 16231 431 82000360038004289181086141618111———203 4227 8253 4123 8133 16159 32433 447 1642004600480012671930226420*24*30*3611 411 411 411 2————2813 16321 8387 848171 16181 4217 8273 453 1647 16553 4480048006000950035314431694018103*Furnished with pipe spacer to support maximum load ratingOFFICE/MANUFACTURING FACILITY 1375 SAMPSON AVE. CORONA, CA 92879 PH: 951.737.5599 FAX: 951.737.0330CUSTOMER SERVICE 800.786.5266www.tolco.com5
www.tolco.comRevision 9/1/2006Fig. 1CBS - Clevis Bolt SpacerComponent of State ofCalifornia OSHPD ApprovedSeismic Restraints SystemSize Range — Size 1" thru 20" clevis hangerMaterial — Carbon SteelFunction — Used as a spacer at a seismic brace location tokeep clevis hanger from collapsing during seismic event.Approvals — Included in our Seismic Restraints Catalogapproved by the State of California Office of Statewide HealthPlanning and Development (OSHPD). For additional load,spacing and placement information relating to OSHPD projects, please refer to the TOLCO Seismic Restraint SystemsGuidelines.Installation Note — Fig. 1CBS fits easily over the cross boltand attaches by pinching tabs down.Finish — Mil GalvanizedNote — Available in HDG finish or Stainless Steel materials.6OFFICE/MANUFACTURING FACILITY 1375 SAMPSON AVE. CORONA, CA 92879 PH: 951.737.5599 FAX: 951.737.0330CUSTOMER SERVICE 800.786.5266www.tolco.com
www.tolco.comRevision 9/1/2006Fig. 1F — Felt Lined Standard Clevis HangerFig. 1PVC — PVC Coated Standard Clevis HangerSize Range — Size 1/2" thru 8" pipe.Material — Carbon SteelInsulation Material — 3/16" feltFunction — The Fig. 1F is designed for the suspension of coppertube so as to prevent electrolysis between tube and hanger. TheFig. 1PVC is designed for steel or other pipe types of same O.D.Both Fig. 1F and Fig. 1PVC act to reduce noise and vibration inpipe or tube system.Approvals — Underwriters’ Laboratories Listed in the USA (UL)and Canada (cUL).Maximum Temperature — 650 FFinish — PlainNote —When Fig. 1F is used for steel or other pipe types, consultfactory for proper size hanger. Available in Electro-Galvanized andHDG finish or Stainless Steel.Order By — Figure number, nominal tube size and finishFig. 1FFig. 1PVCDimensions WeightsPipeSizeRod Size ASTDNFPABCDMax. Rec.Load 1633/81111/1617/811161061061036384311 411 223/83/83/83/83/83/833/441/1641 221/1623/1629/1611161061061047505621 2331 21/21/21/23/83/83/851 261/863/431/1635/1639/16111 411 75/887/810123/441/1651/1655/16615/1611 211 211 221430143019402000191236318429OFFICE/MANUFACTURING FACILITY 1375 SAMPSON AVE. CORONA, CA 92879 PH: 951.737.5599 FAX: 951.737.0330CUSTOMER SERVICE 800.786.5266www.tolco.com7
www.tolco.comRevision 12/10/2007Fig. 2 — Adjustable Band HangerFig. 2NFPA — Adjustable Band Hanger with Reduced RodSize Range — Size 21/2" thru 6" pipe.Material — Carbon Steel, Pre-GalvanizedFunction — Recommended for the suspension of non-insulated pipe orinsulated pipe with Fig. 220 shield.Fig. 2NFPA accommodates the reduced rod schedule of the National FireProtection Association Pamphlet 13.Approvals — Factory Mutual Engineering approved. UnderwritersLaboratories Listed. Conforms to Federal Specification WW-H-171E,Type 10 and Manufacturers Standardization Society SP-69, Type 10.Finish — Pre-GalvanizedNote — Available in Stainless Steel materials.Order By — Figure number, pipe size and materialDimensions Weights***8PipeSizeRod SizeABCMax. Rec.Load Lbs.21 2331 24561/2*1/2*1/2*5/8*5/8**3/4**53/4673/873/8993/841 441/851 4561/861 215/811 421/815/821 417/8600600600100012501250Approx Wt./100Fig. 2Fig. 2NFPA41455259971393/8" nut is used when NFPA rod s
06.12.2007 · MSS-SP-69, Type 4 WW-H-171E, Type 4 Page 12 Fig. 4A Pipe Clamp for Sway Bracing Page 13 Fig. 4F Standard Pipe Clamp with Felt Lining MSS-SP-69, Type 4 WW-H-171E, Type 4 Page 12 Fig. 4PVC PVC Coated Pipe Clamp Page 12 Fig. 4B Seismic Pipe Clamp Page 14 Fig. 75 Swivel Page 32. OFFICE/MANUFACTURING FACILITY † 1375 SAMPSON AVE. † CORONA, CA 92879 † PH:
