Parker Pump Gear PGP-PGM20 Gear Pump Motor

Transcription

PGP020 SeriesPumps and Motors

Catalog HY09-020/USGeneral InformationThe Parker HannifinGear Pump DivisionAssures: Consistent quality Technical i nnovation Premier customer serviceWorldwide Salesand ServiceParker operates sales and servicecenters in major industrial areasworldwide. Call 1-800-C-PARKER formore information, or for a synopsisof the Gear Pump Division, contact aParker representative.PGP020 SeriesPumps and MotorsThe Gear Pump Division’s ability to engineerspecialty products for unique applications haskept us at the forefront of technology, andensured our position as the industry leader.Our success has come from providing aquality product with excellent sales andservice support.We manufacturehydraulic componentsfor a wide range ofindustries including: Construction Refuse/dump truck Material handling Forestry Agriculture IndustrialWARNINGFAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONALINJURY AND PROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by usershaving technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Dueto the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection ofthe products and systems and assuring that all performance, safety and warning requirements of the application are met.The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation andits subsidiaries at any time without notice.Offer of SaleThe items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governedby the provisions stated in the “Offer of Sale”. Copyright 2003, Parker Hannifin Corporation, All Rights Reserved.2Parker Hannifin CorporationGear Pump DivisionYoungstown, Ohio USA

PGP020 SeriesPumps and MotorsCatalog HY09-020/USTable of Contents/Performance DataTable of ContentsPerformance Data.3Ordering Code.4Porting Options.6-9Drive Shafts.10-11Bearing Carrier Codes.12-14Dimensional Data.14Offer of Sale.15PGP020Multiple UnitsBig Performance In A Small PackagePGP020 pumps and motors can be assembled in tandemto provide additional pump flow or more motor torquefrom on the drive shaft. Each gear section is connectedto the drive shaft by a connecting shaft. The strengthof the shafts (their PL factor) determines themaximum gear width the pump or motor can turnat a given pressure.Parker Hannifin’s PGP020 gear pumps and motors arean ideal power for the truck industry. With the ½” gears,it measures only 6” from mounting flange to the portend cover and weighs only 25 lbs.The PGP020 can produce flows up to 29 gpm @2400 rpm up to 3000 psi; output to 39 gpm @ 2400 rpmup to 2500 psi. Motors and pumps can be bi-rotational.To determine the unit’s PL, multiply the operating pressure (P) by the total gear width (L). Example: Assumea PGP020 pump will be operating at 3000 psi and havea 1½” gear housing. Multiply the total gear width of 1½”by the operating pressure.A variety of drive shafts and mounting styles are offeredto meet your needs. Standard features include rigid,one-piece drive shaft and gears and pressure-balancedthrust plated, which assure top efficiency. A rugged,high-strength, cast iron body provides durability.(1.5” gear width X 3000 psi) 4500This pump needs a drive shaft with a PL factor of 4500or more to operate successfully. The PL factor for eachdrive shaft is given on pages 10 and 11.NOTE: In accordance with our policy of continuing product development, we reserve the right to change specificationsshown in this catalog without notice.1 1 .516.59008004001”Motor TorqueSpeed in lbs. 3.518.523.534.031 hp1M20Speed (rpm)Gear Width-Output 17.520.521.025.029.520hp2hp400001200 1500 18002100 240016002000106002000301000Torque (in. lbs.)Output (gpm)120021 P2030Average Torque Output(in. lbs.) at 140 bar/2000 psiGear Width (in.)Average OutputU.S. Gallons at 175 bar/2500 psi40Motor PerformancePump PerformanceGear Width (in.)Performance Data8001200Speed (rpm)1600Gear Width1½”Torquein lbs. GPM87013.087018.086023.085028.020002”Torquein lbs.1150115011401125Parker Hannifin CorporationGear Pump DivisionYoungstown, Ohio USAGPM17.023.530.537.0

PGP020 SeriesPumps and MotorsCatalog HY09-020/USOrdering CodePGP020 How to Specify Code (Boxes 1-3)Example:Box(1)Multiple Units: Repeat if NecessaryBox Box(2) )Box(10)PG P 020 A 1Example:Box(1)PGMultiple Units: Repeat if NecessaryBox Box(2) )Box(10)020Box 1 DescriptionBox 2 UnitBox 3 Shaft End CoverPMABORDER CODEPumpMotorSingleTandem124ROTATION – OUTBEARING – DRAIN PORTClockwise (CW) rotationCounter clockwise rotation (CCW);no outboard bearing3Double rotation; no outboard bearing4CW rotation with outboard bearing5CCW rotation with outboard bearing6Double rotation with outboard bearing8Double rotation with outboard bearing (motor)¼” NPT drain9Double rotation ; no outboard bearing (motor)¼” NPT drainParker Hannifin CorporationGear Pump DivisionYoungstown, Ohio USA

PGP020 SeriesPumps and MotorsCatalog HY09-020/USOrdering CodePGP020 How to Specify (Box 4)Multiple Units: Repeat if NecessaryExample:Box(1)Box Box(2) )Box(10)PG P 020 A 1 0 5Multiple Units: Repeat if NecessaryExample:Box(1)PGBox Box(2) )Box(10)020Box 4 Shaft End Cover CodesBox 4 Shaft End Cover CodesORDER CODEPICTURE / MOUNTING FLANGE TYPEPICTURE / MOUNTING FLANGE TYPE056 BOLT FLANGE – 3.25 DIA. BOLT CIRCLE46SAE 2/4 BOLT “B” ANSI 101 – 2/4102 BOLT PAD MOUNT94SAE 2 BOLT “A” ANSI 82-2274 BOLT CLOVERLEAF96SAE 2 Bolt “B” ANSI 101-2 Type II42SAE 4 BOLT “B” ANSI 101-497SAE 2 BOLT “B” ANSI 101-2ORDER CODEPGP020 How to Specify (Box 5)Multiple Units: Repeat if NecessaryExample:Box(1)Box Box(2) )Box(10)PG P 020 A 1 0 5 C EMultiple Units: Repeat if NecessaryExample:Box(1)PGBox Box(2) 0)020Box 5 Port End Cover CodesOrder CodesSingle UnitsW/O ST W/STCEDEFEGEHEJEMARABox(8)CYDYFYGYHYJYYOROBox 5 Port End Cover CodesO.D.T. PortingOrder CodesTandem Units Port SizeW/O ST e¾1¾11noneSingle UnitsW/O ST . PortingTandem Units Port SizeW/O ST W/STLEFTRIGHTBIKILIMIQDAIEIBYKYLYMYQQno port¾none¾1¾1no portnone¾¾11¾NOTE: W/O ST columns denote units without support studs, and W/ST columns denote units with support studs.5Parker Hannifin CorporationGear Pump DivisionYoungstown, Ohio USA

PGP020 SeriesPumps and MotorsCatalog HY09-020/USOrdering Code/Porting OptionsPGP020 How to Specify N.P.T. Ports (Boxes 6 & 7)(Only When Ordering N.P.T. Ports, See Pages 5-6 for O.D Tube Porting and Page 7 for Split Flange Porting)Example:Box(1)Multiple Units: Repeat if NecessaryBox Box(2) )Box(10)PG P 020 A 1 0 5 C E A B 0 7Example:Box(1)PGMultiple Units: Repeat if NecessaryBox Box(2) )Box(10)020Box 6 Gear Housing - N.P.T. Ports 3000 psiBox 7 Gear Housing - N.P.T. Ports 3000 psiN.P.T. PORTINGORDERPORT SIZECODELEFTGEAR WIDTH 1¼----XX-IJ1¾--XXXXXIK1 YG11¼---XXXXYH11½-------YJ1 ¼1----XXXYK1 ½1-------IA1 ¼none----XXXIBnone1¼----XXXYL1 ¼1¼----XXX6Parker Hannifin CorporationGear Pump DivisionYoungstown, Ohio USA

PGP020 SeriesPumps and MotorsCatalog HY09-020/USOrdering Code/Porting OptionsPGP020 How to Specify O.D. Tubes (Boxes 6 & 7)Example:Box(1)Multiple Units: Repeat if NecessaryBox Box(2) )Box(10)PG P 020 A 1 0 5 C E A B 0 7Example:Box(1)PGMultiple Units: Repeat if NecessaryBox Box(2) )Box(10)020Box 6 Gear Housing - O.D. Tube Ports 2500 psiBox 7 Gear Housing - O.D. Tube Ports 2500 psiO.D. Tube PORTINGORDERPORT SIZECODELEFTGEAR WIDTH XXXEH¾1 ¼*---X*XXXIN¾1½-----XXEJ1¾--XXXXXEK1 ¼*¾---X*XXXIP1 ---AC1none--XXXXXADnone1--XXXXXAF11---X*XXXAG11 ¼*---X*XXXAH11½-----XXAJ1 ¼*1---X*XXXAK1 ½1-----XXAA1 ¼*none---X*XXXAOnone1 ¼*---X*XXXAL1 ¼1¼----XXXAM1 ¼1½-----XXAP1 ½1¼-----XXAE1 ½none-----XXAUnone1½-----XX* Ports designated by an asterisk * are for use as the low-pressure inlet port only.7Parker Hannifin CorporationGear Pump DivisionYoungstown, Ohio USA

PGP020 SeriesPumps and MotorsCatalog HY09-020/USOrdering Code/Porting OptionsPGP020 How to Specify O.D. Tubes (Boxes 6 & 7)Example:Box(1)Multiple Units: Repeat if NecessaryBox Box(2) )Box(10)PG P 020 A 1 0 5 C E A B 0 7Example:Box(1)PGMultiple Units: Repeat if NecessaryBox Box(2) )Box(10)020Box 6 Gear Housing - O.D. Tube Ports 3000 psiBox 7 Gear Housing - O.D. Tube Ports 3000 psiO.D. Tube PORTINGORDERPORT SIZECODELEFTGEAR WIDTH *XXXXEH¾1 ¼*----X*XXIN¾1 ½*-----X*XEJ1*¾--X*XXXXEK1 ¼*¾----X*XXIP1 XXXAG11 ¼*---X*X*XXAH11 ½*-----X*XAJ1 ¼*1---X*X*XXAK1 ½ *1-----X*XAA1 ¼ *none---X*X*XXAOnone1 ¼*---X*X*XXAL1 ¼1¼-----XXAM1 ¼1 ½*-----X*XAP1 ½*1¼-----X*XAE1 ½*none-----X*XAUnone1 ½*-----X*X* Ports designated by an asterisk * are for use as the low-pressure inlet port only.8Parker Hannifin CorporationGear Pump DivisionYoungstown, Ohio USA

PGP020 SeriesPumps and MotorsCatalog HY09-020/USOrdering Code/Porting OptionsPGP020 How to Specify Split Flange Porting (Boxes 6 & 7)Example:Box(1)Multiple Units: Repeat if NecessaryBox Box(2) )Box(10)PG P 020 A 1 0 5 C E A B 0 7Example:Box(1)PGMultiple Units: Repeat if NecessaryBox Box(2) )Box(10)020Box 6 Gear Housing - Split Flange Porting 3000 psiBox 7 Gear Housing - Split Flange Porting 3000 psiSplit Flange PORTINGORDERPORT SIZECODELEFTGEAR WIDTH XXXUH¾1¼---XXXXUJ1¾--XXXXXUK1 OG11¼---XXXXOH11½-----XXOJ1 ¼1---XXXXOK1 ½1-----XXOA1 ¼none---XXXXOBnone1¼---XXXXOL1 ¼1¼----XXXOM1 ¼1½-----XXOP1 ½1¼-----XXOE1 ½none-----XXOUnone1½-----XX9Parker Hannifin CorporationGear Pump DivisionYoungstown, Ohio USA

PGP020 SeriesPumps and MotorsCatalog HY09-020/USOrdering Code/Drive ShaftsPGP020 How to Specify (Box 8)Multiple Units: Repeat if NecessaryExample:Box(1)Box Box(2) )Box(10)PG P 020 A 1 0 5 C E A B 0 7 0 7Multiple Units: Repeat if NecessaryExample:Box(1)PGBox Box(2) )Box(10)020Box 8 Drive ShaftsORDER CODEBox 8 Drive ShaftsPICTURE / MOUNTING FLANGE TYPE07SAE Involute Spline12/24 Pitch - 14 TeethFlat Root Side FitMajor Dia. 1.223-1.228Minor Dia. 1.0627 Max.ORDER CODEPL 58501.31FullSplinePICTURE / MOUNTING FLANGE TYPE301.05 Dia.1.62.12.987.977.875.874MountingFlange1.00PL 4925Dia.06.19MountingFlange2.19S.A.E. “C” SPLINE/ANSI 32-4(2 PIECE SHAFT,CONTINENTAL)2.3912.251.56S.A.E. “B” KEYED ANSI 22-1MountingFlangePL 41502.28.19.631 Dia.1.692.53.91MountingFlange.574.841Gauge Dia.3.006 –.005Taper Per Foot.750 DIA. KEYED SHAFT (.19 WIDE KEY)(2 PIECE SHAFT,CONTINENTAL)15PL 463032.837.827.750.749 Dia.94MountingFlangeCLUTCH PUMP SHAFTPL 49251.9443.88MountingFlange1.25PL 7850.12.121.1121.102.987.977.875Dia.874S.A.E. “B” THREADED KEY ANSI 22-2(2 PIECE SHAFT,CONTINENTAL)25SAE Involute Spline13 Teeth - 16/32 PitchFlat Root Side FitMajor Dia. .853-.858Minor Dia. .7335 .E. “B-B” KEYED ANSI 25-1 MODIFIEDPL 858065SAE Involute Spline16/32 Pitch - 13 TeethFlat Root Side FitMajor Dia. 0.853-0.858Minor Dia. 0.7335 MAX.1.621.09FullSplineMountingFlangePL 60351.00 DIA1.25FullSpline.99 Dia.72 Dia.1.06 Dia.S.A.E. “B” SPLINE ANSI 22-4 TYPE IIS.A.E. “B” SPINE ANSI 22-4CONTINUED ON NEXT PAGE10Parker Hannifin CorporationGear Pump DivisionYoungstown, Ohio USA

PGP020 SeriesPumps and MotorsCatalog HY09-020/USOrdering Code/Drive ShaftsPGP020 How to Specify (Box 8)Multiple Units: Repeat if NecessaryExample:Box(1)Box Box(2) )Box(10)PG P 020 A 1 0 5 C E A B 0 7 0 7Multiple Units: Repeat if Neces

Gear Pump Division Youngstown, Ohio USA 5 Box 4 Shaft End Cover Codes ORDER CODE. PICTURE / MOUNTING FLANGE TYPE 05 6 BOLT FLANGE – 3.25 DIA. BOLT CIRCLE 10 2 BOLT PAD MOUNT. 27 4 BOLT CLOVERLEAF 42 SAE 4 BOLT “B” ANSI 101-4. PGP020 How to Specify (Box 4) Box 4 Shaft End Cover Codes ORDER CODE PICTURE / MOUNTING FLANGE TYPE 46 SAE 2/4 BOLT File Size: 692KBPage Count: 16