Transcription
“Y”-PATTERN GLOBE VALVESLow operationtorque design.Pattern designed to reducethe flow resistance of thevalve to a minimum.Rising and rotatingstem for the most API602 design simplicity.Self aligning twopiece packing gland.Outside Screwand Yoke (OS&Y).Flanged valvesare provided withflanges integralwith the bodyforgings.Standard construction ofbody-bonnet connectionsis welded bonnet type.Bolted bonnet is avaliableas alternative construction.GLOBE “Y”-PATTERNVALVE DESCRIPTIONThe connection wiresecures the disc tothe stem, the disccan swivel in orderto guarantee thecomplete contactbetween the discand seats surfaces.High quality packing forreliable tightness and lowemission performance.Full die forged structure forall pressure containing parts.Back-seat design.Globe valves are used for flowregulation, frequent operation, inHigh flow capacitycreased flow resistance or for positiveport sizes and discshutoff when closed. Globe valves areretraction to minimizeflow velocities andclosing-down valves in which the closuremaximize valvemember is moved squarely on and off theservice life.seat. By this mode of disc travel, the seat opening varies in direct proportion to the travel of thedisc. This proportional relationship between valveBody-guided disc for perfect seatStandard seat design isand disc alignment. Disc is machinedopening and disc travel is ideally suited for duties inintegral type, screwed-in typeto the tightest tolerances to ensurevolving regulation of flow rate. Globe valves can alsois is avaliable as alternativetrouble free shutoff and cycling.construction or in case of boltedbe used for on-off duty, the seating load can be positivelybonnet design. Extra thickness ofcontrolled with high sealing capacity.the seat ring provides sufficientThe change in direction of fluid flow through these valves producesmaterial to renew the seatingincreased resistance and pressure drop. The oblique pattern globesurface over and over again.valve body is designed to reduce the flow resistance of the valve to a minimum. This valve combines low flow resistance for on-offSTANDARD CONFIGURATIONSduty with the robustness of globe-valve seatings. Globe P&ID SYMBOLvalves are used in many industrial applications includingthe oil and gas industry, pharmaceutical, manufacturing,automotive, and marine. Globe valves are also recommended for services requiring frequent operation andBASICCRYOGENICBELLOW SEALpositive shutoff.
SECTION INDEX OF “Y”-PATTERN GLOBE VALVESPAGED-3DESCRIPTIONBOLTED BONNETGLOBE D BONNETGLOBE VALVESTHREADED ANDSOCKET WELD ENDSD-4BOLTED BONNETGLOBE VALVESBASICCONFIGURATIONBASICCONFIGURATIONTHREADED ANDSOCKET WELD ENDSD-10WELDED BONNETGLOBE VALVESBASICCONFIGURATIONASME INTEGRALFLANGED ENDSD-5BOLTED BONNETGLOBE VALVESCRYOGENICCONFIGURATIONASME INTEGRALFLANGED ENDSD-11WELDED BONNETGLOBE VALVESTHREADED ANDSOCKET WELD ENDSD-6BOLTED BONNETGLOBE THREADED ANDSOCKET WELD ENDSD-12WELDED BONNETGLOBE VALVESCRYOGENICCONFIGURATIONASME INTEGRALFLANGED ENDSD-7BOLTED BONNETGLOBE VALVESBELLOW SEALCONFIGURATIONASME INTEGRALFLANGED ENDSD-13WELDED BONNETGLOBE VALVESTHREADED ANDSOCKET WELD ENDSD-8BOLTED BONNETGLOBE VALVESBELLOW SEALCONFIGURATIONSYMBELLOW SEALCONFIGURATIONTHREADED ANDSOCKET WELD ENDSD-14WELDED BONNETGLOBE VALVESASME INTEGRALFLANGED ENDSBELLOW SEALCONFIGURATIONASME INTEGRALFLANGED ENDSD-15AVAILABLE OPTIONS FOR“Y” PATTERN GLOBE VALVESAPPLICABLE STANDARDSDESIGNAPI 602 - ISO 15761 - ASME B16.34INSPECTION & TESTING API 598MARKINGMSS SP-25RATINGASME B16.34FUGITIVE EMISSIONAPI 624 - ISO 15848D-2
“Y”-PATTERN GLOBE VALVESBOLTED BONNET GLOBE VALVESBASIC 0DNSTANDARDDESIGN 4.6YH 301YH 3021/2"15S1152.56.00130.51883.51917.52.14.6YH 3033/4"20S11154.53170.67973.82379.33.57.6YH 3041"25S11355.31220.871385.428111.05.311.6YH 3051-1/4"32S11656.50291.141726.828111.011.625.5YH 26.86.835041313.816.211.615.825.534.7YH 307YH 1931937.67.62.12.14.64.69YH 3019YH 3021/2"15S11154.53120.47973.82379.33.78.19YH 3033/4"20S11355.31150.591385.428111.05.612.39YH 304FU LL BOREWORKINGPRESSURE RATING1"25S12208.66200.791385.430812.111.625.59YH 3051-1/4"32S11656.50271.061726.834713.611.625.59YH 46.89.241849516.519.517.327.338.260.29YH 3079YH 2422429.59.53.73.78.18.125YHR 30125YHR 3021/2"15S21154.53110.431385.426410.45.311.625YHR 3033/4"20S21455.71150.591385.430311.912.126.625YHR 3041"25S22108.27190.751726.834113.413.128.925YHR HR 09.212.639648415.619.117.927.339.460.225YHR 30725YHR 308PRODUCT FEATURES: Outside Screw and Yoke (OS&Y). Self aligning two piece packing gland. Integral backseat.DESIGN TYPE S1DESIGN TYPE S2SPIRAL WOUND GASKETBODY-BONNETCONNECTIONRING JOINTBODY-BONNETCONNECTIONOTHER END CONNECTIONTYPES AVAILABLEINTEGRAL BUTTWELDING ENDBUTTWELDINGENDØCWELDED EENDØBØBFLOWCAH ( O P E N P OS I T I O N )H ( O P E N P OS I T I O N )ØAATBSBFE reserves the right to change designs, dimensions or specifications without notice.THREADED AND SOCKET WELD ENDS
“Y”-PATTERN GLOBE VALVESBOLTED BONNET GLOBE VALVESBASIC CONFIGURATIONASME150(SEE NOTE IGN 2.5 6.00178(1) FIGURE4.06.78.814.81YH 3031YH 30422.50.891385.429511.69.120.11YH 3051-1/2"2"4050S1S19.02 241(1) 9.52229(1)267 10.51 282.5(1) 338.257.91YH 3071YH 3081/2"3/4"1520S1S1152.5 6.00 163.5 6.44178 7.01 190.5 16.23YH 3033YH YH 3051-1/2"2"4050S1S12292679.02 241 9.5210.51 282.5 29.442.864.83YH 3073YH 3081/2"3/4"1520S1S11651916.50 163.5 6.447.52 190.5 718.56YH 3036YH .024.36YH 6.06YH 3076YH 915YHF 30315YHF .415YHF 3051-1/2"2"4050S1S130536812.01 305 12.0114.49 371.5 14.6131381.221.501722346.89.240751216.020.131.5 69.460.9 134.315YHF 30715YHF 381385.45.434134713.413.617.319.438.242.825YRF 30325YRF 30410.39 1110.75 9.425YRF 828381.101.502343209.212.649550619.519.964.6 142.470.4 155.125YRF 30725YRF 308FU LL BOREWORKINGPRESSURE RATINGPRODUCT FEATURES: Outside Screw and Yoke (OS&Y). Self aligning two piece packing gland. Integral backseat. Integral body flanges.NOTE 1: Face-to-Face acc.to ASME B16.10 related to class 300.DESIGN TYPE S1DESIGN TYPE S2SPIRAL WOUND GASKETBODY-BONNET CONNECTIONRING JOINTBODY-BONNET CONNECTIONCØCØBØBH ( O P E N P OS I T I O N )H ( O P E N P OS I T I O N )ØFLOWFLOWA-RFA-RJA-RFA-RJD-4BFE reserves the right to change designs, dimensions or specifications without notice.ASME INTEGRAL FLANGED ENDS
“Y”-PATTERN GLOBE VALVESBOLTED BONNET GLOBE VALVESCRYOGENIC 0DNSTANDARDDESIGN 88883.53.5466466HWEIGHTkglbFIGURE18.418.43.73.7CYH 301CYH .3CYH 3033/4"20S11154.53170.67973.851220.15.411.8CYH 3041"25S11355.31220.871385.455621.98.819.4CYH 3051-1/4"32S11656.50291.141726.855621.913.229.2CYH 26.86.862568824.627.117.325.238.255.6CYH 307CYH 46846818.418.44.24.29.39.39CYH 3019CYH 3021/2"15S11154.53120.47973.851220.15.812.79CYH 3033/4"20S11355.31150.591385.455621.98.418.59CYH 3041"25S12208.66200.791385.458323.011.625.59CYH H 46.89.269377027.330.326.343.157.994.99CYH 3079CYH 51751720.420.45.88.412.718.525CYHR 30125CYHR R R 3041"25S22108.27190.751726.861624.327.360.225CYHR YHR 09.212.667175926.429.946.246.2101.9101.925CYHR 30725CYHR 308FU LL BOREWORKINGPRESSURE RATINGPRODUCT FEATURES: Outside Screw and Yoke (OS&Y). Self aligning two piece packing gland. Integral backseat.DESIGN TYPE S1DESIGN TYPE S2SPIRAL WOUND GASKETBODY-BONNETCONNECTIONRING JOINTBODY-BONNETCONNECTIONCØWELDED BSFLOWACAØBFLOWINTEGRAL BUTTWELDING ENDBUTTWELDINGENDH ( O P E N P OS I T I O N )H ( O P E N P OS I T I O N )ØOTHER END CONNECTIONTYPES AVAILABLEAATBSBFE reserves the right to change designs, dimensions or specifications without notice.THREADED AND SOCKET WELD ENDS
“Y”-PATTERN GLOBE VALVESBOLTED BONNET GLOBE VALVESCRYOGENIC CONFIGURATIONASME150(SEE NOTE ESIGN 5 6.00178(1) 521.05.07.411.116.21CYH 1-1/2"2"4050S1S19.02 241(1) 9.52229(1)267 10.51 282.5(1) 441.762.51CYH-3071CYH-3081/2"3/4"1520S1S1152.5 6.00 163.5 6.44178 7.01 190.5 02 241 9.5210.51 282.5 6.50 163.5 6.447.52 190.5 CYHF 30315CYHF 30425444.015CYHF "2"4050S1S130536812.01 305 12.0114.49 371.5 14.6131381.221.501722346.89.268679127.031.132.6 71.8 15CYHF 30763.0 138.9 15CYHF 381385.45.462062624.424.618.922.441.749.325CYRF 30325CYRF 30476.425CYRF 30510.39 1110.75 81.101.502343209.212.677478530.530.967.7 149.3 25CYRF 30774.6 164.4 25CYRF 308FU LL BOREWORKINGPRESSURE RATINGPRODUCT FEATURES: Outside Screw and Yoke (OS&Y). Self aligning two piece packing gland. Integral backseat. Integral body flanges. Bonnet Extension.NOTE 1: Face-to-Face acc.to ASME B16.10 related to class 300.DESIGN TYPE S1DESIGN TYPE S2SPIRAL WOUND GASKETBODY-BONNET CONNECTIONRING JOINTBODY-BONNET CONNECTIONØCCØBØBH ( O P E N P OS I T I O N )H ( O P E N P OS I T I O N )ØFLOWFLOWA-RFA-RJA-RFA-RJD-6BFE reserves the right to change designs, dimensions or specifications without notice.ASME INTEGRAL FLANGED ENDS
“Y”-PATTERN GLOBE VALVESBOLTED BONNET GLOBE VALVESBELLOW SEAL CONFIGURATIONTHREADED AND SOCKET WELD 2"2"ASME800ASME1500ASME2500DNSTANDARDDESIGN 1.097.2101.9FIGURESYH 301SYH 302SYH 303SYH 304SYH 305SYH 306SYH 307SYH 3089SYH 3019SYH 3029SYH 3039SYH 3049SYH 3059SYH 3069SYH 3079SYH 30825SYR 30125SYR 30225SYR 30325SYR 30425SYR 30525SYR 30625SYR 30725SYR 308FU LL BORENPSPRODUCT FEATURES: Outside Screw and Yoke (OS&Y). Self aligning two piece packing gland. Integral backseat.DESIGN TYPE P4DESIGN TYPE P5DESIGN TYPE P6HANDWHEEL OPERATED& SPIRAL WOUNDGASKET BODY-BONNETCONNECTIONHANDWHEEL OPERATEDWITH THRUST BEARINGS& RING JOINT GASKETBODY-BONNET CONNECTIONGEAR OPERATED& RING JOINT GASKETBODY-BONNET CONNECTIONØFLOWFLOWAAFLOWAWELDED NIPPLESINTEGRAL BUTT WELDING ENDOTHER ENDCONNECTIONTYPES AVAILABLEBUTTWELDINGENDCCØBØBH ( O P E N P OS I T I O N )CH ( O P E N P OS I T I O N )ØØBH ( O P E N P OS I T I O N BFE reserves the right to change designs, dimensions or specifications without notice.WORKINGPRE
VALVE DESCRIPTION Globe valves are used for flow regulation, frequent operation, in-creased flow resistance or for positive shutoff when closed. Globe valves are closing-down valves in which the closure member is moved squarely on and off the seat. By this mode of disc travel, the seat open-ing varies in direct proportion to the travel of the disc. This proportional relationship between valve .
