WIXLIB

CATALOG NO.DATEPROJECTTYPERDA4L SERIES O2 Mini Adjustable Recessed MultiplesX4: Four Lamp LinearX22: Four Lamp 2x2 SquareDimensions on Page 3Measurements are from a single headRDA4L1RDA4L210W14W1000Lm1400LmWATTAGE1LUMEN OUTPUTBEAM SPREADSCOLOR TEMPERATURECRI12 Spot, 29 Medium, 37 Flood2700K, 3000K, 3500K, 4000K, Crisp White83 (80min) or 90 INPUT WATTAGEINPUT CURRENT (A) 120V / 277VPull-down Mechanism10W14W.08/.04.12/.05INPUT VOLTAGE120V Dimming (0-10V)120V AC, 50/60Hz277V Dimming (0-10V)277V AC, 50/60Hz120V Triac/ELV Dimming120V AC, 50/60HzDRIVER POWER FACTOR 0.90TOTAL HARMONIC DISTORTION (THD) 20%DIMMING RANGETriac, ELV, 0-10VLutron HiLume Dimming LISTINGSWARRANTYSYSTEM RATING1-100% (Performance varies based on dimmer selection, see Dimming Spec Sheet for details)1-100%cCSAus Certified to UL StandardsSuitable for Dry or Damp LocationscCSAus Certified to UL924 Standard for Emergency Lighting when specified with the EmergencyBattery Backup OptionCP Housings are Chicago Plenum CCEA listedFive (5) year replacement after date of purchaseEmergency Battery Option covered by a one (1) year replacement guarantee after date of purchase50,000 Hours @ 70% Lumen Maintenance1. Lumen values are approximate, see photometric test resultsCONTECH LIGHTING 725 LANDWEHR ROAD NORTHBROOK, ILLINOIS 60062 PHONE 847.559.5500 www.contechlighting.com 2022 Conservation Technology of Illinois, LLC. All rights reserved. Note: Specifications subject to change without notice.REV0122P1

CATALOG NO.DATEPROJECTTYPERDA4L SERIES O2 Mini Adjustable Recessed MultiplesORDERING INFORMATIONExample Order:RDA4L127KC12D1SX22BLKPConsult factory for custom configurations, including:– Different Beams, Color Temperatures, Lumen Packages or Multiple Circuits (2-maximum) are required in a single multiple-head fixture– Non-standard, custom paint finishesLED SeriesRDA4L1 - 10W1000LmRDA4L2 - 14W1400LmColor Temp/CRI Electrical/Dimming83 (80min) CRI12D1 - 120V TRIAC/ELV27K - 2700K12D2 - 120V 0-10V30K - 3000K27D2 - 277V 0-10V35K - 3500K40K - 4000K90 CRI27KC - 2700K30KC - 3000K35KC - 3500K40KC - 4000K30KW - 3000K Crisp WhiteTrim FinishB - Matte BlackP - Matte WhiteN - TrimlessOptionsCP1 - Chicago PlenumER 2 - Factory Installed7W/200mA Emergency Battery Backup,Remote Test SwitchEI2 - Factory Installed7W/200mA Emergency Battery Backup,Internal Test Switch in Side Wall of HousingMounting AccessoriesIncludes Wing Type Commercial Mounting Brackets,Hanger Bars ordered separatelyHB-24 - 27-Inch Flat Hanger Bars for RL-KITHBC-24 - 25-Inch C-Channel Hanger Barsfor RL-KIT in Grid Ceiling ConstructionLuminaire AccessoriesFA-44-(B, P) - 1- Inch Snoot/Accessory HolderFA-16 60MM - 2-3/8- Inch Dia. Black Honeycomb LouverRequires FA-44 Snoot/Accessory HolderLF16-* 60MM - 2-3/8- Inch Dia. Tempered Glass Lenses;Requires FA-44 Snoot/Accessory HolderBeamS - 12º SpotM - 29º MediumF - 37º FloodLampsHousing/Luminaire FinishX1 - One/SquareX2 - Two/LinearBLK - Matte BlackX3 - Three/LinearWHT - Matte WhiteX4 - Four/LinearX22 - Four/2x2 Square1. Chicago Plenum is not available for use with Series 2. Cannotbe used with the Emergency Battery Backup option.2. Emergency Battery Backup: For use in new constructionapplications only - requires above ceiling access. Will onlyenergize one (1) head on a multi-head unit - 400 lumennominal average for either Series 1 or Series 2.Interchangeable/Replacement Optics2INOPTIC-S 2INOPTIC-M 2INOPTIC-F 5500011-12 Beam Interchangeable Optic29 Beam Interchangeable Optic37 Beam Interchangeable Optic2-Inch Diffusion DiscNOTE: When a Snoot, Louver or Lens is desired, ensure the samequantity is ordered as the number of lamps on the unit, e.g.a two-lamp unit would require two (2) media to be ordered*Tempered Glass Lens Color/Pattern Legend-73 (Spread Lens), -LS (Linear Spread Lens), -SL (Soft Light), -SOL (Solite),-UV (Optivex UV Filter), -A (Amber), -B (Blue), -CL (Clear), -DPE (Dichroic Peach), -G (Green),-LB (Light Blue), -R (Red), -RO (Rose), -Y (Yellow)CONTECH LIGHTING 725 LANDWEHR ROAD NORTHBROOK, ILLINOIS 60062 PHONE 847.559.5500 www.contechlighting.com 2022 Conservation Technology of Illinois, LLC. All rights reserved. Note: Specifications subject to change without notice.REV0122P2

CATALOG NO.DATEPROJECTTYPERDA4L SERIES O2 Mini Adjustable Recessed MultiplesPRODUCT DETAILSConstruction Non-IC Housing; requires minimum 3- inch clearance aroundluminaire from insulation material Thermal protection provided in case of improper insulation use Heavy duty 18-gauge steel housing; powder coat painted in matteblack or matte white Single to four head units available; four head unit available in twoconfigurations: rectilinear and two-by-two square Housing weights: 1- Head 5lbs2- Head 8lbs3- Head 11lbs4- Head Linear 13lbs4- Head 2X2 13lbs Output over voltage, over-current and short circuit protection Approved for through circuit wiring; maximum of (8) No. 12AWG branch circuit conductors (4 in, 4 out) Junction Box has nine (9) 1/2- inch pry-outs Wire rating: 90 C, thermally protected Wing type Mounting Brackets allow for 3- inch vertical adjustment.Brackets accept optional HB-24 Flat Hanger Bars or HBC-24 “C”Channel Hangers.Features Available in 12 Spot, 29 Medium and 37 Flood and can beeasily changed in the field for optimal flexibility Each TIR Optic has been engineered to provide a smooth uniformbeam, maximizing output and minimizing glare Complete luminaire (Heads, Drivers and Junction Box) can beaccessed from below the ceiling Lamp heads with constant tension design for tilt and rotationadjustability; tilt mechanism can be locked into place with aprovided allen wrench Lamp heads provide 370 rotation and 45 tilt adjustability insidethe housing Lamp head features a firm-feel detent pull-down mechanism(2- inch extension) which allows the head to tilt up to 90 ;pull-down mechanism can be locked into place with a providedallen wrench Housing may be used for trimmed or trimless applications Trimmed housings are available with a steel powder coat matteblack or matte white trim; steel torsion springs provide secureretention in housing Trimless housings allow the ceiling to be finished and paintedright to the aperture opening for a clean appearance; trimlessframe is steel with a matte white powder coat finishPerformance Summary Single, high lumen output multi-chip LED array available in 10W/1100Lm and 14W/1400Lm. Wattage/lumen values are per head Select from 2700K, 3000K, 3500K and 4000K; CRI of 83 (80min.) or high CRI of 90 available 3000K Crisp White LED delivers 90 color rendering withadditional violet wavelengths that enhance white visibility Excellent fixture-to-fixture color consistency within a 2-stepMacAdam Ellipse Tolerance Optional FA-44 Snoot/Accessory Holder accepts up to two (2)LF16 60MM Lenses or FA-16 60MM Black Honeycomb Louver All RDA4L Series luminaires are available for dimming and nondimming applications; for a list of compatible dimmers, refer tothe Dimming Specification Sheet UL8750 and Class 2 Compliant; RoHS Compliant, US only Assembled in the USAEDOVERALLHOUSINGTRIM EDGE 1-INCH# OFLAMPS LENGTH (A) WIDTH (B) HEIGHT (C) LENGTH (D) WIDTH (E) LENGTH (F) WIDTH ILING 11-5/16"11-5/16"10-7/8"10-1/4"CABCeiling Thickness:1/2" – 7/8"Wing Bracket Width: 7-3/8"CONTECH LIGHTING 725 LANDWEHR ROAD NORTHBROOK, ILLINOIS 60062 PHONE 847.559.5500 www.contechlighting.com 2022 Conservation Technology of Illinois, LLC. All rights reserved. Note: Specifications subject to change without notice.REV0122P3

CATALOG NO.DATEPROJECTTYPERDA4L SERIES O2 Mini Adjustable Recessed MultiplesPHOTOMETRICSTEST PERFORMANCE IS FOR A SINGLE HEAD UNITRDA4L230K12D1SX1Designed for 50,000 Hour Lamp Life 3LM-63 Test No. 87351LM-79 Test No. 78891Intensity 92.12.614'67.73.0Candela Curve075 450060 9000Spectral Power Distribution Chart490 45 25Spectral Flux (W/nm)Fixture Delivered Lumens: 1184Total Watts@120V: 13.8Lumens Per Watt: 85.8Center Beam Candle Power: 13269Beam Distribution: 12 Spacing Criterion: 0.22Color Rendering Index (CRI)1: 83Color Temperature (CCT)2: 3073K20151050380135000 15 420460500540580620660700740780Wavelength (nm)30 RDA4L230K12D1MX1Designed for 50,000 Hour Lamp Life 3LM-63 Test No. 87352LM-79 Test No. 4'30.16.7Candela Curve02000Spectral Power Distribution Chart490 2575 2060 400045 Spectral Flux (W/nm)Intensity DistributionFixture Delivered Lumens: 1432Total Watts@120V: 13.8Lumens Per Watt: 103.8Center Beam Candle Power: 5909Beam Distribution: 29 Spacing Criterion: 0.46Color Rendering Index (CRI)1: 83Color Temperature (CCT)2: 3086K15105038060000 15 420460500540580620660700740780Wavelength (nm)30 RDA4L230K12D1FX1Designed for 50,000 Hour Lamp Life 3LM-63 Test No. 87353LM-79 Test No. '19.18.10Candela Curve13002575 2060 2600Spectral Power Distribution Chart490 45 Spectral Flux (W/nm)Intensity DistributionFixture Delivered Lumens: 1478Total Watts@120V: 13.8Lumens Per Watt: 107.1Center Beam Candle Power: 3752Beam Distribution: 37 Spacing Criterion: 0.58Color Rendering Index (CRI)1: 83Color Temperature (CCT)2: 3061K15105038039000 15 42046030 500540580620660700740780Wavelength (nm)1. Accuracy of Rendering Colors 2. Color Appearance of Light Source 3. Dependent on Surrounding Temperatures 4. Colors Present within the Light SourcePHOTOMETRIC MULTIPLICATION FACTORSLumen output values fluctuate based on CCT. To estimate lumen output of the various CCT/CRI options, multiply 3000K (80 CRI min) results by the following:MULTIPLIERSCCTOUTPUTCCTSTD CRIHIGH 10.870.750.750.750.75CONTECH LIGHTING 725 LANDWEHR ROAD NORTHBROOK, ILLINOIS 60062 PHONE 847.559.5500 www.contechlighting.com 2022 Conservation Technology of Illinois, LLC. All rights reserved. Note: Specifications subject to change without notice.REV0122P4

RDA4L SERIES O2 Mini Adjustable Recessed MultiplesDimming Specifications Incandescent 120VAC dimmers adjust the light with “forward phase control,” where the dimmer “chops” the forward part of the AC wave to deliverless or more power to the light source. No neutral wire connection required. Electronic low voltage 120VAC dimmers adjust the light with “reverse phase control,” where the dimmer “chops” the back part of the AC wave todeliver less or more power to the light source. Neutral wire connection required. 0-10V DC low voltage dimmers operate using two low voltage dimming wires that are separate from the 120V or 277V AC power. The dimmersends a variable output voltage to the fixture based upon the dimming level. 10V corresponds to undimmed operation, 5V to 50% and so on.Switching on/off is controlled with the line voltage power (120V or 277V AC) input to the dimmer and then dimming operation is controlled withthe 0-10V DC low voltage wiring connection between the dimmer and the LED driver. The control signal runs on two low voltage control wires(color coded violet and pink/gray).RDA4*Dimming Option 12D1, 12D2 or 27D2ManufacturerProductModelLight P0%-100%CooperDecoratorDAL06P0%-100%Pass & SeymourTitanCD4FB-WNAISD BCNASynergyWatt StopperMiro roMAELV60011%-100%NALutronNovaNFTVLutronNova CT103P9%-100%*277V Triac and ELV Dimming is not availableNOTES1. Testing was performed with a single fixture connected to dimmer.2. Testing has been performed on these dimmers, but this does not imply any warranty of compatibility.3. Dimming performance can be influenced by different loads, as well as variations in dimmer switches within the same model.4. Dimmer maximum load rating with LED may differ from published traditional source dimmer ratings. Consult manufacturer for maximum dimmer information.5. Consult factory for additional dimming information.CONTECH LIGHTING 725 LANDWEHR ROAD NORTHBROOK, ILLINOIS 60062 PHONE 847.559.5500 www.contechlighting.com 2022 Conservation Technology of Illinois, LLC. All rights reserved. Note: Specifications subject to change without notice.REV0122P5

2INOPTIC-S - 12 Beam Interchangeable Optic 2INOPTIC-M - 29 Beam Interchangeable Optic 2INOPTIC-F - 37 Beam Interchangeable Optic 5500011 - 2-Inch Di usion Disc Luminaire Accessories FA-44-(B, P) - 1-Inch Snoot/Accessory Holder FA-16 60MM - 2-3/8-Inch Dia. Black Honeycomb Louver Requires FA-44 Snoot/Accessory Holder