Light Pipe Selector Guide - RS Components

Transcription

Light PipeSelector Guide Optopipe Lightpipes

40 Years of LED ExperienceWhy Light Pipes?Visual status indication provides for safe and reliable operation of electrical equipment, instruments, andelectronic devices and also serves diagnostic purposes as well. While lamp holders, which utilize separate incandescent or neon bulbs and lens caps, dominated the market in the majority of the 20th century, LED-based light sources are predominantly used today to provide visual indication.Technical SolutionsLight-pipes provide front-panel indication where: Traditional indicators are too large or other space constraints exist Indication is required over, around, or beneath front-panel components EMI/RFI concerns require location of the light source away from the front-panelIndex02 Product OverviewOptopipe Lightpipes04 PCB Mount SinglePosition Horizontal06 PCB Mount MultiplePosition Vertical08 PCB Mount MultiplePosition Horizontal14 Panel Mount SinglePosition15 Panel Mount Multipleposition Indication is desired after all mechanical design considerations were madeWe also design light-pipes for non-diagnostic applications, including lighted company logos.Light loss between the LED and light-pipe interface must be considered and there is also additionaltransmission loss through the pipe or wherever there is a bend. The shape of the light-pipe also influencesthe output. Dialight’s design engineers will recommend the best LED for use with each light-pipe.Configuration and featuresAlmost any configuration or size can be accommodated and we currently offer standard solutions in:Single ElementRound LensVerticalShieldedOver RS-232Multiple ElementSquare LensHorizontalTextured LensOver SFP CageSingle RowRectangular LensVertical Right AnglePolished LensUnder PCB MountMultiple RowIlluminated CornerHorizontal Right AngleMounting ConsiderationMost light-pipes are mounted to a PCB by pressing into holes drilled into the PCB. Depending on the application, epoxy is also indicated for additional support. Some light-pipes are designed to press into thefront-panel and rest on the PCB, just above the LED(s). Heat-staking is another process that is used to mountlight-pipes in specific applications.Micro LED LEDs16 RecommendedMicro LED SurfaceMount LEDsNew Products18 Optopipe Light pipeActuator ExtensionsThe following pages are organized as a product overview. Additional information including detailed specs, are available at: www.dialight.com.The most recent version of this selector guide can be found at:www.dialight.com/assets/brochures and catalogs/indication/lightpipe selector guide.pdf2

Dialight Optopipes Dialight’s expertise in LED indication and lighting is apparent in our line of engineered light-pipes. Dialight has been aleading manufacturer of lightpipes for network communication and electronic equipment for more than 10 years. Our200 standard and custom solutions are complemented by new designs resulting from customer requirements or marketdevelopments. Dialight’s optical and mechanical engineers use the latest modeling tools to develop mechanical andoptical simulations that ensure expected performance of the design. SLAs are available to represent the physical andoptical characteristics of the design. Dialight also has an extensive optics lab for post-design measurement and analysis.With various single and multiple position products for either Panel Mount or PCB Mount oriented lightpipes already inproduction, we also have the added capability to manufacture custom solutions to meet your specific requirements.Features and Benefits Impervious to failure due to shock and vibration Up to 90% more efficient than traditional light sources when delivering monochromatic light Low-voltage and minimal power consumption Light is produced through photonic emission, not as a by-product of a radiating heat source Molded from RoHS compliant UL94-V0 Water Clear Polycarbonate with an oxygen index of 35%.Typical Applications Data center Infrastructure Servers - Rack mount; blade; tower Storage – High-performance storage subsystems for high- end enterprise Networking Equipment for enterprise data centers and telecom communication centers Switches, routers, and network control equipment interconnected using fiber optic andhigh speed wiring Storage Networking Hardware Fiber channel host bus adapter cards (HBAs); converged network adapter cards (CNAs);\ISCSi adapter cards;InfiniBand adapter cards Next-Gen Wireless Wireless Infrastructure Electronic Test & Measurement Instruments Communications Testing Equipment Process controls Automation Medical Handheld devicesTo compliment our wide range of Lightpipes, Dialight is also the worldwide leader in applied LED technology includingCircuit Board and Panel Mount Indicators, Surface Mount LEDs, LED signaling products for the transportation industryand LED lighting fixtures for industrial users. Dialight’s Lightpipes are available through our extensive line of Sales Representatives and Distributors world-wide. For a complete listing that includes the ability to check stock status at ourDistribution partners, please visit our website at www.dialight.com. The most current version of this catalog will alwaysbe availble at: www.dialight.com/assets/brochures and catalogs/indication/lightpipe selector guide.pdf3

PCB Mount Single Position HorizontalPart NumberSuggestedLED*Drawing.420 .005(10,67 0,12).240(6,1).719(18,26).245(6,22).118 .005(3 0,12).216 .005(5,49 0,12).624(15,85).095(2,41).066(1,68).262 MAXPANEL .190.160.095CHARMILLE #24 .155.085515-1011F.462(11,73).230(5,84)Ø.230 .005(5,84 0,12).876(22,25).293(7,44).43(10,9).320 .005(8,13 0,12) .21(5,3)PIN #1.050.066CURVED & DIFFUSEDFRONT SURFACE597-3XX1-207F597-77X1-207F.100(2,54).173 .005(4,39 0,12).346 .005(8,79 0,12).15(3,8).30(7,6)Ø.116 MOUNTING PINSTYP (2 F597-77X1-207FFRONT PANEL.20.10.173 .005515-1039F.150.7031.00Ø.116 MOUNTING PINS(2) PLACES.346 7)Ø.140 .007(3,56 0,17).21(5,3)(REF).095(2,41).106 .007(2,69 0,17)Ø.079 (NOM)MOUNTING PINSTYP: 2 PLCS.095(2,41)597-3XX1-207F597-77X1-207F.062 P.C. BOARD.117 .007(2,97 0,17).340(8,64)515-1049F.063.080.03FRONT 0.11Ø.079;2 PLCS.350515-1054F* ’X’ represents a variable part number. See page 17 for LED details.4.170.065.300.045

Part 3)LED 2.061.100.100.380.563R .20.125.614.394597-3XX1-207F597-77X1-207F.113LED .100 4,32).185(4,7).291(7,39).45 79)597-3XX1-507F597-77X1-507F.155 .155 .170(4,32).400(10,16)45 7X1-507F.096(2,44).110(2,79)155 155 2 LISHED.420(10,67).210(5,33) 97 .236(5) (6)597-3XX1-207F597-77X1-207F.100(2,54).078 .003(1,98 20(10,67).210(5,33)0.77(19,5).17(4,3).157(4) 7 (7)(5)597-3XX1-207F597-77X1-207F.100(2,54).078 .003(1,98 0,07)515-1142-195F.156(3,96).140(3,56).281 .003(7,14 0,07)* ’X’ represents a variable part number. See page 17 for LED details.5

Part 00(5.08)ITT K5V2Lighted 97(5)Ø.240(6,1)ITT K5V2Lighted TactileSwitchØ.118(3).315(8)515-1149-145F.570 (14,5).423 .010(10,74 0,25).138 REF(3,51).056 .003(1,42 0,07).223 .003(5,66 0,07).315 REF (8).055(1,4).060(1,52).139 .003(3,54 0,07).059(1,5).223 .003(5,66 0,07).020 .010(0,51 07FLED(REF).197 (5).050(1,27)1.029 .010(26,13 0,25) .135 3 515-1151F.137(3,48).118(3).020 .010(0,51 0,25)CLEARANCELED(REF).060(1,52).055(1,4).315 .003(8 46)1.339 .003(34 0,07).059(1,5).118(3)515-1154FPCB Mount Multiple Position Vertical.55 REF(13.9).180(4.57)DIFFUSED FRONTSURFACES; 2 PLCS.120(3.05)Ø.120 .003(3.05 0,07)TYP; 2 PLCS.200 .005(5.08 0,12).300 .010(7.62 0,25).109 (2,77).062(1.57).077(1.96)REF.360(9.14).100 .005(2.54 0,12).110 (2,79)Ø.63(1,6ALIGNMENTONLY PIN.090 .010(2.29 0,25).41(10.3)515-1061F.180(4,57).120(3,05)Ø.120 .003(3,05 0,07)TYP; 2 PLCSDIFFUSED FRONTSURFACES; 2 PLCS.200 .005(5,08 0,12)597-3XX1-507F597-77X1-507F .003- .001 ,008- ,003MOUNTING PINØ.055 .003(1.4 0,07).100 .010(2.54 0,25).200 .010(5,08 0,25)).70(17,9) REF.300 .010(7,62 0,25).109(2,77).360 .235(9,14) (5,97)597-3XX1-207F597-77X1-207F.100 .005(2,54 0,12).110(2,79).090 .010(2,29 0,25)515-1094F* ’X’ represents a variable part number. See page 17 for LED details.6ALIGNMENTONLY PINØ.055 .003(1,4 0,07).56(14,3)Ø.63 .003- .000(1,6 ,008- ,000 )MOUNTING PIN.100 .010(2,54 0,25).200 .010(5,08 0,25).065(1,65)

SuggestedLED*DrawingPart Number17.8(0,70)REF4.6(0,18)3.05(0,120)Ø3.05 .002(,120)TYP; 2 PLCS*7.62 .007(,300)9.1(0,36)*5.08 .003(,200)2.77(,109)DIFFUSED FRONTSURFACES;2 )*2.54 .003(,100).093 .0092.8(.11)4.6(0,18)ALIGNMENTONLY PIN*2.29 .007(,090)*(.064 .002MOUNTING PIN(MAJOR DIA.)*2.54 .007(,100)*5.0/8 ).538(13,67).125(3,18)TYP.125(3,18).237(6,02)(2) BLACKLIGHTSHIELDSSEE NOTE 15(5,46)PCBSMT LED.200(5,08)SMT LEDS.324(8,23)515-1108F.175(4,45).090(22,9)*.100 .015(2,54 0(4,32)Ø.098(2,49)TYP; (3 .150(3,81).090(2,29).215 .000- .010(5,46 ,000- 0,25 ).16(4,2)515-1064F.528(13,41).21(REF).90(REF).190 .005.100Ø.098 .005TYP; (3 PLCS)(LIGHTPIPEFRONT END).170 .005.045(MAX)597-3XX1-507F597-77X1-507F.54(REF) .170 .005.110 TYP.150 .005.90.529 )DIFFUSED Ø0.70 .003/-.001(1,78 0,08/-0,03).030.281.125 (TYP);(3) 7-77X1-207F.140.125.175515-1009F.300.371* ’X’ represents a variable part number. See page 17 for LED details.200GAP7

Part NumberSuggestedLED*Drawing.90 (22,9).141(3,58)Ø.098(2,49).100 .015(2,54 ).528(13,41).215 .000- .010(5,46 ,008- ,25 0 (0,76).030(0,76).195.125 SQ. (4,95)TYP.(3,18)TYP.LIGHTSHIELDS.851 .070(21,6) (1,78)597-3XX1-107F597-77X1-107F.203(5,16) LED #1.200(5,08).324(8,23).470(11,94).175(4,45).175 (4,45).175 (4,45).237(6,02)515-1023-803F.775(19,69)PCB Mount Multiple Position Horizontal.46.228 .0051.90ø.228 .005TYP; 2 PLCS.015.800.075.150 TYP2 PLCS.437.300P.C. BOARD.200.389 .010.47 F.228 .005.1501.825.114 .003.46(REF).228 .005ø .075 .003TYP; 2 PLCS.0601.95(REF).855.355.150 TYP2 PLCS.075TYPP.C. BOARD.200.437.47 (MAX).389 090-801F1.880.114 .003.228.315 (8)(NONACCUM)TYP. 3Ø.154(3,91)TYP 4Ø.154(3,91)TYP 45)Ø.090(2,29).015 - .020(0,39 - 0,50).140(3,56).0100Ø.68 .002- .000 (2,54)Ø.065(1,73 ,005- ,000 ) TYP 2TYP; 2515-1052F(1,65)ALIGNMENTPIN.315 (8)(NONACCUM)TYP. (2,54)TYP.090(2,29)TYP.090.535 (2,29)(13,59)PCB .062”THICKSMD LEDTYP. 4.600(15,24)DIFFUSEDOUTPUT SURFACETYP. 32.030(51,56).100(2,54).580(14,73).015 - .020(0,39 - 97-77X1-207F597-3XX1-507F597-77X1-507FSMD LEDTYP. 3* ’X’ represents a variable part number. See page 17 for LED 7X1-207F

Part NumberSuggestedLED*Drawing.750.5501.23.2002 145.075LED (REF.)LEDS.275.300 .0061.100.1441.0801.388515-1070F1.85.2004 PLCS.550(TYP).100 .010- .005.0621.23.140.1204 PLCS.81 .550597-3XX1-507F597-77X1-507F .050- .008.075DETAIL “A”.2751.1001.080.062.300 .006 .010- .005515-1022F1.73.100 TYP12 PLCS.148 TYP11 PLCS.100 TYP12 PLCS2.435.410.040 (POSITIONS1, 6, 7 & 12 1-207F.120.0141.600.320515-1045F.796 .015(20,22 0,12).100 .005(2,54 0,12).058(1,47)TYP7 PLCS.045(1,14).316 .010(8,03 0,25).125(3,18).040(1,02).190 .005(4,83 ,012)Ø.076 .005(1,93 ,012)TYP 8 PLCS.125(3,18).200 .003(5,08 0,17)TYP 3 1-407F597-5202-407F597-5311-407F597-5411-407F.120 .010(3,05 0,25)2.5(,10)4.57(,180)TYP 7 PLCSØ2.50Ø(,098)16 PLCSDIFFUSED 4.32(,170)597-3XX1-507F597-77X1-507F3.81(,150)1.27 (,050)SOR MNTG PINS6 PLCS ,315)8.46(,333)515-1062F2.5(,10)Ø2.50Ø(,098)16 PLCS4.57(,180)TYP 7 PLCS515-1063FDIFFUSED )597-3XX1-507F597-77X1-507F3.81(,150)1.27 (,050)SOR MNTG PINS6 PLCS 198)8.00(,315)8.46(,333)* ’X’ represents a variable part number. See page 17 for LED details.9

Part NumberSuggestedLED*Drawing1.75 .02(44.5 0,5).050 .008(1,27 0,2).48(12,2).46(11,7)45 x.015CHAMFERTYP 4 PLCS.6(1,5 .00- .01 0.0- ,02).550 ).040 .005(1.02 0,2).075(1,91).118 .015(3 0,38).34(8,6)Ø.063MOUNTING PINTYP 3 PLCSDIFFUSED FRONT SURFACETYP 4 7-5XXX-407F.050 .008(1.27 0,2)515-1030F.50(12,7).250 .005(6,35 0,12).140(3,56)TYP.070(1,78)TYP.51(13,1).165.094 .005 (4,19)(2,39 0,12).074(1,88)Ø.140 .005(3,56 0,12)TYP.118(3).125(3,18)Ø.079 .002(2,01 0,05)TYP.17(4,4).640 .008(16,26 0,2)Ø.140.250(3,56)(6,35)TYPTYP 3 PLCS.165(4,19).514 .008(13,06 1-407F.094(2,39)Ø.079 .002.125(3,18.250(6,35)PRESS-FIT PINTYP 2 0(TYP).125.142(TYP) .005- .007 .07- .01 0.07- 0,17.342 .010(8,69 0,25)).118(3)Ø.140.074(1,88)C.L. -3401-407F.165.094.118(3MM)C.L. LED #1DETAIL “A”.250(TYP)515-1020F.140(NOTE 2)MOUNTINGPIN #1.640 .010(16,26 0,25).500(12,7).165(4,19).514 .010(13,06 1020-804F.250 TYP2 PLCS597-3XX1-407F .07- .01 0.07- 0,17).125.094.250515-1020-805F* ’X’ represents a variable part number. See page 17 for LED details.10 LED #1Ø.140TYP; 3 PLCS MountingPIN #1.342 .010(8,69 0,25) LED .005 / 7-3311-407F597-3401-407F598-8210-107F.21(REF).140

Part 18.250(6,35)TYP. 3 .00- .01 0.12- ,017).140(3,56)TYP.4.210(5,33).164(4,17) LED.094(2,39).140(3,56).250(6,35)TYP. 07F598-8210-107F.250(TYP. ).142(TYP. )Ø.140(TYP).125.094 140(3,56)TYP(4 PLCS) 1.37Ø.170 (TYP);4 PLCS1.11(REF) SMT LED.400 TYP;3PLCSØ.170 SQR (TYP);4 PLCS.46.375.15PC 10-107F Ø.116 NOM“SNAP-FIT”MOUNTING PINS2 PLCS.240.200.800FRONT PANEL & WALL NOT SHOWN IN THIS VIEW515-1037F.095.575.500.500.190;3 PLCSØ.190;3 3XX1-207F597-77X1-207F.092.050;3 PLCS.085.075 (TYP).150; (TYP)3 PLCS515-1010F.063FRONT PANEL.300.03.1302 PLCS.0802 PLCS.2002 9;2 PLCS515-1051F.350.170.150.300.045* ’X’ represents a variable part number. See page 17 for LED details.11

Part NumberSuggestedLED*Drawing.275 .005.268(NOTE 2)Ø.069TYP; 3 PLCS.36REF.056 TYP3 PLCS.125.100.040.197 .005597-3XX1-507F597-77X1-507F597-3XX1-407F.063 LEDØ.069 .002.225 .005515-1005-801F.89REF.462.096.086(TYP).137.196 (TYP)597-3XX1-207F597-77X1-207F .000 / -.005.33.230.100.400.200.161515-1029F.268 .010(6,81 0,25).318(8,08).095(2,41) 7-3XX1-207F597-77X1-207F.125(3,18).642 .010(16,31 07F597-77X1-507F.065 .005(1,65 0,12).144(3,66).114(2,9).228 .003(5,79 0,07)515-1118F.090 TYP2 PLCS.120 TYP2 597-77X1-507F.065.063 (MAJOR DIA)MOUNTING PINSTYP 2 PLCS.380515-1110F2.57(REF)DIFFUSED FRONT SURFACESTYP; 12 PLCS.080 TYP12 PLCS.150 TYP12 PLCS.050 TYP12 PLCS.100 TYP12 PLCS.74(REF).062515-1093F* ’X’ represents a variable part number. See page 17 for LED details.122.420 .010.220 .007TYP; 11 PLCS1.35(REF).750.079 DIA (NOM)MOUNTING PINSTYP; 4 PLCS.150.370(REF).140.0471.162.692 .007.280 LEDS597-3XX1-207F597-77X1-207F

Part NumberSuggestedLED*Drawing.090 TYP8 PLCS.120 TYP8 PLCS.0501.650.21(REF)2.048.310.075.050.063 (MAJOR DIA)MOUNTING PINSTYP; 4 F.63(REF).075TYP.70(REF).157.130DIFFUSED .093.159(MAX).014Ø.063(MAJOR DIA)MOUNTINGPINSTYP; 4 740.880REF597-3XX1-207F597-77X1-207FR .150.015 RECESS.145 TYP.140.080.350.300.272515-1113F.740.720.190 TYP.095 TYP.325 TYPø .190 TYP.380.190.354ø .160 TYP.259.162 .003.19PIN DIAMETERSø .166 .002/-.000TYP 2 PLCS.060.195.2701.700.200.023.030.075.075.370 .003515-1120F597-3XX1-207F597-77X1-207F.116.101 7F.065.114.144515-1126F* ’X’ represents a variable part number. See page 17 for LED details.13

Part 640(16,25).177(4,5)Ø.118(3)TYP (4).085(2,15)TYP (4).010(0,25).177(4,5) 43F.031(0,8).197(5).158(4,03).354(9)Panel Mount Single 207F.066 .002(1,68 0,05)RIBS (3) @ 120 ø.072 .002(1,83- .010 ,005- ,00)515-1027Fø.064 .000- .005(1,63 ,002 )- ,012ø.037 .002- .000597-2XX1-407F597-2X01-207F(0,94 ,005 )- ,000RIBS FORPRESS-FIT(3 0(9,65)ULTRASONIC WELDDETAIL.260.198 .005 (6,6)(5,02 0,12).190(4,83)REVERSE MOUNTLED.272 .005(6,91 0,12).194 .005(4,93 0,12).098 .005(2,49 RSE MOUNTLED515-1004F3.75ø.250 1-507F515-1047FDIFFUSED FRONTSURFACE* ’X’ represents a variable part number. See page 17 for LED details.14

Part (3,81)SQØ.150(3,81).040(1,02)TYPPANELTHICKNESSOR F597-3XX1-207F597-77X1-207F.150(3,81).062 THICK PCB3.785 .010(96,14 X1-507FØ.120(3,05)ø.188 .002- .005(4,78 ,005 )- 07F597-77X1-207FØ.140REF.095 REF.21REF LEDS.610REF515-1157F.110.06TYP.475.482Ø5.00MM CBI(DIALIGHT P/N:550-3509-801F2.070.185 50PCB2.49515-1044F1.902.08REF.250Panel Mount Multiple Position.18 TYP2 PLCS.75TYP.550 .008ø.2002 PLCS.110.024 .008.039TYP.07.17ø.126 .0082 X1-207F597-3XX1-507F597-77X1-507F515-1033F.36 .03(9,01 1Fø.126(3,2).17(4,4)* ’X’ represents a variable part number. See page 17 for LED details.15

Part NumberSuggestedLED*Drawing.750.500.250.025.070 TYP .128 TYP(REF)REF3 PLCS.4054 PLCS45 TYPREFø.080.218.050ø.156 TYP4 PLCS.090 TYP3 PLCS.91(REF)R .008(REF).047R 1-507F515-1040F1.98.375 .005 TYP5 PLCS.100 TYP6 PLCS.060.278 .003TYP 4 PLCS LEDS.250 TYP6 PLCS.495.67.070TYP.380.128 .003 TYP4 18).118 (3)2 PLCS.500(12,7).130(3,3).375 .002(9,53 0,05).078 7X1-507F.155(3,94).750 .002(19,05 0,05).156 (3,96).040(1,02)4 PLCSø.116 .002(2,95 4 .002- .001ø.120TYP597-3XX1-507F597-77X1-507FCURVED 3 DIFFUSEDFRONT SURFACES.364REF LED.065 REF LED.664REF515-1156F* ’X’ represents a variable part number. See page 17 for LED details.Recommended Micro LED Surface Mount LEDsDialightPart NumberColorMaterialDom .λ Typ.(nm)1206 Series Package (3.2mm X 1.6 X Height) Reverse 597-6601-607FBlueInGaN470597-6901-607FWhiteInGaNx 7783-607FRed/BlueAlInGaP/InGaN631/4705mm Through Hole n56516IntensityTyp. (mcd)Forward ViewingVoltage AngleTyp. (V) 02052020Single ColorSingle ColorSingle ColorSingle ColorSingle ColorSingle ColorSingle 0Single ColorSingle ColorSingle Color

Recommended Micro LED Surface Mount LEDsChipLEDDialightPart NumberColor0603 Series Package (1.6mm X 0.8mm X 5312-407FGreen597-5412-407FYellow-Green0805 Series Package (2.0mm X 1.25mm X -407FGreen597-5411-407FYellow1206 Series Package (3.2mm X 1.6mm X rdVoltageTyp. 202020Single ColorSingle ColorSingle ColorSingle ColorSingle ColorSingle ColorSingle .22.12.11501501501500.80.80.80.820202020Single ColorSingle ColorSingle ColorSingle ColorAlInGaP635402.21400.720Single 0.80.81.51.51.51.5202020202020202020202020Single ColorSingle ColorSingle ColorSingle ColorSingle ColorSingle ColorSingle ColorSingle ColorSingle ColorSingle ColorSingle ColorSingle 111120202020Single ColorSingle ColorSingle ColorSingle 0202020Single ColorSingle ColorSingle ColorSingle ColorSingle le ColorSingle ColorSingle ColorSingle ColorSingle ColorSingle ColorSingle Color1353.51201.920Single ColorBi-ColorBi-Color1206 Series Package with Lens (3.0mm X 1.6mm X 12-407FGreenAlInGaP597-3202-407FOrangeAlInGaP1208 Series Package (3.0mm X 2.0mm X P/GaP597-2712-607FDom .λ /GreenAlInGaP589/5711208 Series Package with Reflector (3.0mm X 3.0mm X nAlInGaP573597-3401-507FYellowGaAsP588PLCC-2 Series Package with Reflector (3.5mm X 2.8mm X GaP587x: 0.32597-3901-207FWhiteInGaNy: 0.31597-7701-207FRed/GreenGaAsP/GaP 628/570597-7721-207FYellow/Green Gap/GaAsP -207F Orange/Green GaAsP/GaP 606/570597-7761-207F Orange/Green GaAsP/GaP 605/557597-7781-207FRed/BlueInGaAIP/GaN 633/46717

Featured ProductsApplicationDialight Optopipe actuator extensions are designed for use withC&K K5V2 lighted tactile switches. These snap-in clear lenses do notneed to sit on the edge of a PCB and is offered in a verity of sizes toaccommodate a range of panel depths. Dialight Optopipe actuator extensions are ideal for server, storage, network infrastructure, automotive, and medical applications.Optopipe LightpipeActuator Extensions“L” (SEE NOTES).315(8).177(4.5)Ø.240(6.1)ITT/CONNONK5V SWITCH(REF. ONLY)Ø.157(4).065(1,65).035 (0,89)SUPPORT PERMISSIBLE.010 MAX .010(0,25)“L” (SEE NOTES)3.15(8).177(4,5)ITT/CONNON K5V SWITCH(REF. rder Code.035(0,89)SUPPORT PERMISSIBLE.010 MAX (4PLCS)Ø.197(5)515-114 X-XXX-FLength in (mm)Diameter (mm)Ø.118(3)Part Numbers: 4mm diameterPart NumberFeatures & Benefits:w Fits C&K K5V2 illuminated LED switchw Available in 3mm and 4mm diametersw Variable length from 10mm to 25mmw RoHS compliantw Custom color options available (consult factory)w Custom length options available (consult factory)w Opaque colors available for use with C&K K5V2nonilluminated 250F25mmPart Numbers: 3mm diameterPart Number515-1149-145F18Length14.5mm

NEW!Optopipe Vertical LightpipesApplicationDialight Optopipe vertical light pipes provide an excellent solutionfor products that contain a PCB that is parallel to the panel in needof indication. These UL94-V0 Water Clear Polycarbonate light pipesare secured to the PCB using a custom snap-fit base that is easyto install. Vertical light pipes are ideal for building automation andother industrial applications where light needs to be transferredfrom a parallel PC board, or the environment is subject to shockand vibration. A good way to utilize low voltage and low currentLEDs, Dialight's optopipes provide a great way to efficiently transferlight.3mm DiameterFlat Lens515-1192-XXXXXFConvex Lens515-1193-XXXXXFDomed Lens515-1194-XXXXXFFeatures & Benefits: Lengths varying from .250” to 1.250” Three lens styles for optimal viewing angles; Flat, Domed, and Convex Designed for both single and multi-color LEDs Positive snap in mounting to PCB with opaque light barrier Low-voltage and minimal power consumption Light is produced through photonic emission, not as aby-product of a radiating heat source Molded from RoHS compliant UL94-V0 Water ClearPolycarbonate with an oxygen index of 35%. Designed to be used with Dialight surface mount led's plcc-2 andplcc-4 pad layout shown, 597-XXXX-207f. See the surface mountselector guide for led operating characteristics. Lower profile surfacemount led's in 598 and 597 series can be used as well as, reversemount led's. Please consult factory for availability. Available in clear lens (F) and diffused textured lens (DF)515-119X-X XXXXFLens Shape2 - Flat3 - Convex4 - DomedF Clear, DF DiffusedLength inches (mm) see dim ALED Type0 - PLCC2 or PLCC 41 - Chip LED2 - Reverse MountOrder CodesPLCC2PLCC4Part NumberDIM “A” inches (mm) DIM “B” inches (mm)Lens Shape515-1192-00250F.250 (6.35).197 (5)Flat515-1192-00550F.550 (13.97).375 (9.53)Flat515-1192-01000F1.000 (25.4).375 (9.53)Flat515-1194-00300F.300 (7.62).197 (5)Domed515-1194-00350F.350 (8.89).197 (5)Domed515-1194-00450F.450 (11.43).197 (5)Domed515-1194-01000F1.000 (25.4).375 (9.53)DomedCustom length available, consult factory19

Other Opto Electronic ProductsOffered by Dialight40 Years of LED ExperiencePrism Series Right Angle SMTwwwwSurface mountable solution with integrated optics2mm & 3mm LEDsTape and reel / pick and place compatibleCan withstand higher temp RoHS solder process and eliminates need forsecondary optics or separate processw Available with square or round lens, and also in low current versionw Packaged in single, bi & tri level configurationsw RoHS compliantCBI Selector Guidehttp://www.dialight.com/Assets/Brochures And Catalogs/Indication/SMT selector guide.pdfThrough Hole CBI Circuit Board IndicatorswwwwwwHoused LEDs in variety of configurations including:Right angle, vertical & horizontal ganged arrays in single bi, tri, and quad blocks2mm, 3mm & 5mmPerfect for direct view or backlighting applicationsVariety of colors and LED types including:Singl

Light loss between the LED and light-pipe interface must be considered and there is also additional transmission loss through the pipe or wherever there is a bend. The shape of the light-pipe also influences the output. Dialight’s design engineers will recommend the best LED for use with each light