Transcription
PROFILE "E"LED ENCLOSED & GASKETED FIXTURESLEEK DESIGN - EASY TO CLEAN AND SERVICE - STAINLESS MOUNTING HARDWAREThe Profile E is the firstof its’ series of uniquelyshaped enclosures.Made InThe
Housing (f1) Rated Acrylic Co-Extruded Lens and HousingUL Approved and evaluated for daisy chainingLens and Housing all in one piece2’, 4’ or 8’ lengthsLength: 2’, 4’ or 8’ Width: 3.86” Depth: 3.75”EES-S1-HE-GRY-A-2 / EES-S1-HE-GRY-A-4 / EES-S1-HE-GRY-A-8Designed for complete compatibility with LEDsBoard Trays Pre-painted Cold Rolled Steel2’,4’, 8’ lengthsSingle Row EnviroLux Printed Circuit Boards
Driver Placement End Holds Mount to edges of the boardtray: EES-EH-BLK-NChannel Hold mounts to boardtray near the center: EES-CH-BLK-NDriver Channel creates enclosure for the driver: EES-DC1-16 or PRF-DC1-20 Three components; End Hold, Driver Channel and Channel Hold, create theencapsulated electrical enclosure where all higher voltages are to be located.All components meet UL1598 requirementsDriver Channel Hinges for easy maintenance
End Caps Gasketed End Cap: EES-S1-EC-BLK-N-STwo Per FixtureKnock outs for power feed and Optional Vent(EES-VENT-0500) Installation is quick and easyusing Acme Screw(one perendcap): EES-AS-BLK-NEnd Cap Installation:1. Install Endcap to Driver Side End Hold using oneAcme Screw2. Slide Housing Extrusion over the tray assembly3. Using a second Acme Screw tighten another EndCap onto unit completing the enclosureHardware Placement:REVISIONSREV.Driver ChannelCT-SCRW-UGTfor DriversChannelHoldEndHoldDATEDESCRIPTIONDRAWN BYAPPDMountingBracketRivets#8 SM Screws (2)SLP 1/2" VentCord GripExtruded HousingACME SCREWGasketedEnd CapLED BoardTrayEND HOLD#8 SM Screwfor LED Boards1/2"GrommetUNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN INCHESTOLERANCES ARE AS FOLLOWS:The information contained in this document is theconfidential property of SLP Lighting, a division ofKoller Enterprises. This information is to be used bythe recipient only for the purpose of which it hasbeen provided by SLP Lighting. This document andany information contained therein may not bereproduced or made available to any third partywithout the written authorization of SLP Lighting.No tooling to produce the product which is the1400 South Old Highway 141Fenton, MO. 63026CustomerProjectMaterialPH (636) 600-4084 FX (636) 600-4108www.SLPlighting.com
Mounting Bracket 316 Stainless Steel: EES-MBEasy Snap on InstallationOptional mounting systems: Direct to Ceiling Bail for Chain Drilled for Threaded Rod PendantOptional Safety Bail: EES-S1-SBSnaps around fixture intoMounting Bracket
CertificationsCSANSFNEMA 4XIP65IP66RoHS
confidential property of SLP Lighting, a division of Koller Enterprises. This information is to be used by the recipient only for the purpose of which it has been provided by SLP Lighting. This document and any information contained therein may not be reproduced or made available to any third party without th
